Tag: Vocational Orientation

YouthQuest’s Five Favorite Memories of 2018

Blog
3D ThinkLink students from Capital Guardian Youth ChalleNGe Academy at University of Maryland Terrapin Works April 2018 Vocational Orientation

____________________________________________
We thank our supporters for making these moments possible through their contributions.
You can support our work by:
Making a donation through our secure PayPal link
Choosing us as your designated charity on AmazonSmile
Registering on Bidding for Good so you can take part in our online auctions, sign up for our golf tournament, and support other upcoming fundraisers
____________________________________________

As we wrap up an eventful year filled with accomplishments, here’s a look back at the YouthQuest Foundation’s most memorable moments.

Success for More At-Risk Teens

Sixty-five cadets from National Guard Youth ChalleNGe Programs completed our 3D ThinkLink training this year. We taught these at-risk youth to think differently about failure and success as they prepare to enter the job market or pursue higher education.

3D ThinkLink students from Capital Guardian Youth ChalleNGe Academy receive awards December 2018
Click picture to see more photos

Our classes help students develop sought-after STEM skills through hands-on experience with professional-level CAD (Computer-Aided Design) software, 3D printers and computers. In addition, the trial-and-error nature of 3D printing teaches our students about critical thinking, problem-solving, perseverance, resilience, creativity and collaboration. These “soft skills” are even more valuable to employers than the technical skills.

3D ThinkLink training takes place during the two annual class cycles at Maryland’s Freestate ChalleNGe Academy, South Carolina Youth ChalleNGe Academy and the District of Columbia’s Capital Guardian Youth ChalleNGe Academy. Instructors from the schools come to our lab in Chantilly, Virginia, twice a year to update their skills and help us constantly improve the 3D ThinkLink experience.

Nearly 300 ChalleNGe cadets have completed 3D ThinkLink training since we launched the project in 2013. We have reached many more young people through our partnerships with the PHILLIPS Programs for Children and Families at schools in Fairfax and Annandale, Virginia, for students with autism and other special needs; and with Horizons Hampton Roads, serving low-income children in Portsmouth, Norfolk and Virginia Beach.

This year, we rewarded 13 cadets for their outstanding performance in class by bringing them to our lab for a week of advanced training. Seven students earned scholarships for the essays they wrote about the impact the 3D ThinkLink experience had on their lives. The 2018 essay competition winners are: Caleb Pearson ($1,000) from SCYCA; Chigaru Todd ($1,000) and Jacob Foote ($500) from CGYCA; Sthephanie Alvarez-Vega ($1,000), Bradley Berry, Trevor Haney and Dante Isom ($500) from Freestate.

A Chance Encounter, a Lightbulb Moment

We put a lot of planning into Vocational Orientation to make sure our students get the most out of the events, which show them how 3D printing is used at businesses and universities. But sometimes the best parts of these field trips are unscripted. Freestate Instructor Jamarr Dennis recalled the moment during a Vocational Orientation tour of The Foundery in Baltimore that “the lightbulb went on” for Cadet Sthephanie Alvarez-Vega when she struck up a conversation with craftsman/entrepreneur Festus Jones.

Vocational Orientation and Inspiration

Like Sthephanie, South Carolina Youth ChalleNGe Academy Cadet Caleb Pearson attended Immersion Lab training and earned a scholarship in the essay contest. And like her, Caleb was unexpectedly inspired by someone he met during Vocational Orientation. Nathan Lambert, a top graduate student, helped guide the SCYCA group through the University of North Carolina at Charlotte Mechanical Engineering Department in October. Toward the end of the tour, Nathan told the cadets that he’d hated high school and barely graduated, but after serving in the military, he discovered his passion for engineering and learned to excel in college. “It made me feel really confident,” said Caleb, an aspiring engineer who once struggled in school. “If this man has made it this far in his life … and I want to be exactly where he is, I can do it.”

Stepping Up With Loudoun Youth

The YouthQuest Foundation has been the prize money sponsor for the Step Up Loudoun Youth Competition every year since 2012. The contest, run by Loudoun Youth, Inc. and Loudoun County Parks, Recreation and Community Services, challenges teams of teens in Loudoun County, Virginia, to identify problems in their communities, then develop and implement solutions.

We have been so impressed by Step Up’s results that we doubled our contribution to $5,000 this year. YouthQuest Co-Founder and President Lynda Mann made the announcement at the preliminary round of competition for more than 60 teams on April 5.

This year’s winning team, Princess Packages, started a volunteer organization to lift the spirits of young girls who suffer from sadness and isolation during long hospital stays. Other top-10 team projects included a tutoring and mentoring program for elementary school students, a chatbot app to help immigrants to improve their English language skills and study for the U.S. citizenship exam, and a networking service to connect teens with employment and volunteer opportunities.

Teams for next year’s Step Up contest have already formed and we can’t wait to see what projects they create in the spring.

Recognition for Innovation

YouthQuest Operations Manager Juan Louro, President Lynda Mann and Communications Director Steve Pendlebury send Drucker Prize semifinal round submission
Operations Manager Juan Louro, President Lynda Mann and Communications Director Steve Pendlebury send Drucker Prize semifinal submission form

We are honored to have been chosen as one of the 50 semifinalists for this year’s Drucker Prize, a $100,000 award for innovation by nonprofit organizations.

Our presentation about the 3D ThinkLink Initiative was selected from among more than 500 entries nationwide for the prize, which recognizes nonprofits that best exemplify business management legend Peter Drucker’s definition of innovation: “Change that creates a new dimension of performance.”

This was our third year competing for the Drucker Prize and each time, we get a little farther. We look forward to entering the contest again in 2019.

These excerpts from our Drucker Prize presentation sum up the principles that will continue to drive our organization in the year ahead.

The YouthQuest Foundation exists to help America’s at-risk youth become successful adults by changing the way they think about their past failures and providing opportunities for them to fulfill their potential through education and life-changing experiences.

The at-risk youth we serve – minorities, kids with disabilities and those from low-income families – make up a disproportionate share of America’s dropouts. They’re on a path that leads to poverty and even prison.

The kids we serve once saw themselves as failures. We help change their perception of failure, and of themselves, by offering an innovative way to get them on course to a better life.

Students Find Inspiration in Vocational Orientation

News
Ian McCormick leads a Vocational Orientation tour of Duncan-Parnell's 3D printing facility in Charlotte, NC, for 3D ThinkLink students from South Carolina Youth ChalleNGe Academy

Visiting colleges and businesses where 3D printing is used helps our 3D ThinkLink students understand the real-world value of the skills we teach them.

This month, cadets from Maryland’s Freestate ChalleNGe Academy, the District of Columbia’s Capital Guardian Youth ChalleNGe Academy and South Carolina Youth ChalleNGe Academy took part in Vocational Orientation events that showed them many potential career paths involving 3D design and printing. They also met inspiring people who encouraged them to aim high as they set their sights on the future.

ChalleNGe Academies are military-style alternative schools that offer at-risk teens a second chance. Most of the students dropped out or were kicked out of regular high schools. So the cadets in our 3D ThinkLink classes probably didn’t expect to have much in common with someone like Nathan Lambert, a top graduate student at the University of North Carolina at Charlotte.

Graduate student Nathan Lambert with 3D ThinkLink students from South Carolina Youth ChalleNGe Academy on a Vocational Orientation tour of the University of North Carolina at Charlotte's Department of Mechanical Engineering
Nathan Lambert leads a tour at UNCC

But as Nathan helped lead a tour of the university’s Mechanical Engineering Department on October 17, the SCYCA cadets discovered that he’d hated high school and barely managed to graduate. After six years in the military, which included time as a paratrooper in Afghanistan, he came home with new life experiences and a sense of self-discipline. Nathan decided to become a mechanical engineer, even though it meant going back to school for years.

College is different from high school, Nathan told the cadets, because you have more control over your schedule and you can focus on subjects you’re passionate about. He started at a community college and eventually enrolled at UNCC, where his wife Brittney Lambert is also a mechanical engineering grad student. The Lamberts both urged the cadets to think about going to college, even if – like Nathan – they’d never considered it in high school.

UNCC Mechanical Engineering Professor Dr. Jeff Raquet, who specializes in 3D printing, introduced the cadets to the school’s rocketry team. The students showed the cadets the rocket they’re building for this year’s NASA Student Launch Competition, a project that involves 3D design and printing as well as traditional subtractive manufacturing and many other aspects of engineering. The competitors must design, build and test a reusable rocket that carries a payload a mile high and returns safely to the ground. UNCC won $2,500 for placing second in last year’s competition and is aiming for the top prize of $5,000 this time.

3D ThinkLink students from South Carolina Youth ChalleNGe Academy watch a 3D printer work whyile visiting Duncan-Parnell in Charlotte, NC, for Vocational Orientation
SCYCA Cadets get a close look at one of Duncan-Parnell’s 3D printers

Also during their visit to Charlotte, the SCYCA cadets toured Duncan-Parnell’s office to see a wide variety of the latest 3D printers. The company has hosted many Vocational Orientation events for our students and received YouthQuest’s Community Partner of the Year award in 2016.

The Freestate 3D ThinkLink students got an impromptu lesson in entrepreneurship while they toured The Foundery in Baltimore. As staffer Eric Smith was showing them the machines, some Foundery members struck up conversations with the cadets and told them what they’ve been able to accomplish by using the industrial makerspace as their own workshop.

There’s no need to get involved in shady hustles on the street, they said, when you can use The Foundery’s equipment to turn a few dollars’ worth of raw material into custom-made products worth hundreds. One craftsman showed off a $13 mirror that he’d laser-engraved with his own design to create a sign he would sell for 10 times as much to a local barbershop.

Eric Smith, who led a Vocational Orientation tour of The Foundery for our 3D ThinkLink students from Maryland's Freestate ChalleNGe Academy on October 9, 2018, shows acrylic panels that were etched by a laser cutter.
The Foundery’s Eric Smith explains laser engraving to Freestate cadets

Eric reinforced the message, telling the cadets that what’s most valuable is knowledge. He reminded the cadets that the CAD (computer-aided design) skills they use for 3D printing can also be applied to things like computer-controlled cutting and engraving machines. And you don’t set your product’s price based on how long it takes to make it, he said, but on what your knowledge of how to make it is worth to your customer. 

One place where students can gain that valuable knowledge is Harford Community College, where the Freestate cadets began their day of Vocational Orientation on October 9. Professor David Antol showed our students the school’s 3D printing lab and explained the opportunities available for them to build on the skills they’re learning in our introductory 3D ThinkLink course.

David Antol, Coordinator for Applied Technology Programs at Harford Community College, led a Vocational Orientation tour of the school's 3D printing lab for our 3D ThinkLink students from Maryland's Freestate ChalleNGe Academy
Freestate cadets in Harford Community College’s 3D printing lab

HCC is one of the few community colleges that emphasizes 3D printing. It offers an associate degree in engineering technology in a program that focuses on applied knowledge of manufacturing processes, along with critical thinking, problem solving and communications skills – all of which are in high demand among employers. The school is also preparing to launch a certificate program in additive manufacturing.

Because HCC offers these programs and is located close to the Freestate campus, it’s an excellent resource for cadets as they make their post-graduation plans.

Like the South Carolina students who visited UNCC, the Capital Guardian cadets’ Vocational Orientation experience included an in-depth look at a major university’s 3D printing operations along with an overview of its mechanical engineering program.

Senior Lab Manager John Fitzell led a Vocational Orientation tour of the University of Maryland's Terrapin Works facilities for 3D ThinkLInk students from DC's Capital Guardian Youth ChalleNGe Academy
John Fitzell leads a tour of Terrapin Works

The students from DC toured the Terrapin Works facilities at the University of Maryland’s main campus in College Park, guided by Senior Lab Manager John Fitzell. He showed them printers that use plastic filament, similar to those they use in class, along with machines that print with specialized materials such as liquid resin, flexible polymers and even metal. Seeing the many different types of printers and the objects they create helped the students understand the applications for each type of 3D printer.

John also took the cadets through some of the labs in Maryland’s recently opened A. James Clark Hall, explaining the projects engineering students complete as they progress through their course of studies, and how they use 3D printing in those projects.

Local Motors National Harbor Customer Engagement Manager Tracye Johnson stands with 3D ThinkLink students from Capital Guardian Youth ChalleNGe Academy in front of a BAAM (Big Area Additive Manufacturing) machine
Tracye Johnson and CGYCA cadets with the BAAM at Local Motors

One kind of 3D printer Terrapin Works does not have is the BAAM (Big Area Additive Manufacturing) machine – a giant device with a print bed that’s seven feet wide and 13 feet long that can make objects up to three feet high. The CGYCA cadets saw that machine during their first stop of the day on October 11, when they visited Local Motors at National Harbor. Local Motors uses the BAAM, along with a huge five-axis milling machine to make Olli, a 3D-printed, self-driving electric shuttle bus.

Besides showing our students how 3D-printed vehicles are made, Local Motors Customer Engagement Manager Tracye Johnson introduced them to e-NABLE. It’s a worldwide project that mobilizes people with 3D printers to make prosthetic hands and arms for people who were born missing fingers or who have lost them due to war, disease or disasters. Tracye encouraged the cadets to think about this and other ways they can use their 3D printing skills to help others.

Vocational Orientation is one of our most important tools for changing the lives of our 3D ThinkLink students. The experiences expand the horizons and spark the imaginations of the at-risk youth we serve. Our foundation is deeply grateful to all the organizations that make these events possible.  

[Show picture list]

Local Motors Hosts 3D ThinkLink Vocational Orientation

Blog
Customer Engagement Manager Tracye Johnson points to the 3D-printed Accessible Olli vehicle during a Vocational Orientation tour of Local Motors in National Harbor, Maryland for 3D ThinkLink students from DC's Capital Guardian Youth ChalleNGe Academy on April 19, 2018.

We often remind 3D ThinkLink students that the goal of our program isn’t only to teach them about 3D printing. We want them to learn new ways of thinking and be inspired to accomplish things they didn’t think they could do.

That’s why Vocational Orientation is such an important part of the 3D ThinkLink experience. Twice a year, we take students from our 3D classes at the Maryland, South Carolina and the District of Columbia Youth ChalleNGe academies on tours of businesses and schools that use 3D design, scanning and printing.

3D ThinkLink students from Capital Guardian Youth ChalleNGe Academy pose next to the BAAM, a giant 3D printer used to make Local Motors' Accessible Olli self-driving shuttle
Capital Guardian cadets at Local Motors with BAAM, a giant 3D printer

The visits show our students how they can apply their 3D skills in STEM career fields and continued education. In addition, these at-risk youth are literally expanding their minds because exposure to new ideas and experiences stimulates the creation of neural connections in their brains.

There’s no doubt that the brains of cadets from DC’s Capital Guardian Youth ChalleNGe Academy were growing as they toured the Local Motors Heritage Showroom and demonstration facility at National Harbor, Maryland on April 19.

Local Motors Customer Engagement Manager Tracye Johnson guided the students through a tour that included hands-on activities to help them understand the technology and thinking that goes into making Accessible Olli, the company’s 3D-printed, self-driving electric shuttle bus. The vehicle introduced at January’s Consumer Electronics Show in Las Vegas looks like the original Olli, which debuted two years ago, but it’s loaded with high-tech systems to assist disabled passengers.

3D ThinkLink students from Capital Guardian Youth ChalleNGe academy do hands-on activities to simulate various disabilities during a Vocational Orientation tour of Local Motors National Harbor on April 19, 2018.
Hands-on Care Station activities simulate various disabilities

For instance, Accessible Olli can recognize visually impaired riders and use audio to communicate with them. For hearing-impaired people, it has an array of visual displays and can even understand sign language. There are also special features to meet the needs of passengers with mobility problems or cognitive impairments such as dementia.

Local Motors uses a combination of additive and subtractive manufacturing to make its vehicles. The students saw a room-sized version of the 3D printers they use in class called the BAAM (Big Area Additive Manufacturing) machine, which deposits layer after layer of carbon fiber-reinforced ABS plastic to form Olli’s body parts. Next to the BAAM is a giant five-axis milling machine that smooths the rough surfaces of the 3D-printed parts.

The company pioneered this production method with the Strati, the first 3D-printed electric car, in 2014. Two years later, it rolled out a drone-guided version in partnership with Mouser Electronics. The students got to see both vehicles on display in the Heritage Showroom.

Capital Guardian Youth ChalleNGe Academy Cadet Kaya Green holds a 3D-printed e-Nable hand assembled during a Vocational Orientation tour of Local Motors National Harbor on April 19, 2018
Capital Guardian Cadet Kaya Green holds a 3D-printed e-Nable hand

Tracye led the cadets through a series of Care Station activities to get them thinking about how people deal with various disabilities and what engineers must consider in designing an autonomous shuttle to serve those customers.

At one station, they had to manipulate a box puzzle toy while blindfolded. At another, students tried to understand what was being said to them while wearing headphones that made hearing impossible. There was an activity to simulate memory problems.

Everyone wanted to try the station demonstrating physical limitations, where they had one of their hands taped up and tried to get the best score in a game of cornhole. Even our Director of Instruction Tom Meeks got into the act, tossing beanbags at the target.   

The tour concluded with Tracye introducing the cadets to another project that combines 3D printing and designing devices for the disabled. They assembled 3D-printed pieces to make e-Nable prosthetic hands. Volunteers for the nonprofit organization Enabling the Future use their 3D-printers to create free hands and arms for disabled people around the world.

More Mind-Expanding Vocational Orientation Events

From National Harbor, the Capital Guardian students headed north to College Park to see the University of Maryland’s Terrapin Works 3D printing facilities. Operations Manager Nathanael Carriere showed many different types of printers and explained the various processes each one uses to create 3D objects. The cadets also got a look inside A. James Clark Hall, the UMD Engineering School’s newest building where Terrapin Works has some of its most advanced 3D printers and scanners.

3D ThinkLink students from South Carolina Youth ChalleNGe Academy visit UNCC's Motorsports Engineering program during Vocational Orientation on April 26, 2018
SCYCA students visit UNCC’s Motorsports Engineering program

The DC students weren’t the only ones who got to see how 3D design and printing can be used to make vehicles. The class from South Carolina Youth ChalleNGe Academy visited the University of North Carolina at Charlotte on April 26 to see the North Carolina Motorsports and Automotive Research Center.

Dr. Jeff Raquet of the Mechanical Engineering Department led the tour of the facility that’s filled with race cars, engines and the equipment engineers use to make them. The school is just a few miles from the Charlotte Motor Speedway and about 15 percent of all NASCAR engineers are UNCC graduates.

The SCYCA students began their day in Charlotte with a tour of Duncan-Parnell, the winner of our 2016 Community Partner Award, to learn about career opportunities in 3D printer maintenance and support. 3D printing products and services are a big part of the work Duncan-Parnell does with construction companies, architects and engineers. The company also provides service and technical support for the Z450 full-color powder bed printer in the 3D ThinkLink Creativity Lab at our Chantilly, Virginia, headquarters.

Prof. David Antol shows Freestate ChalleNGe Academy 3D ThinkLink students the 3D printing lab at Maryland's Harford Community College during Vocational Orientation on April 17, 2018.
David Antol shows Freestate students the 3D printing lab at Maryland’s Harford Community College

Vocational Orientation for the 3D ThinkLink class from Maryland’s Freestate ChalleNGe Academy featured a visit to Harford Community College on April 17. Professor David Antol showed them projects being done in the school’s 3D printing lab and explained the HCC’s Engineering Technology program, which will soon include a certification in 3D printing.

A favorite Vocational Orientation destination for the Freestate students is The Foundery, an industrial makerspace in Baltimore. And the highlight of the tour is always the demonstration done by blacksmith Sam Salvati. Sam says using a forge, anvil and hammer is the original 3D printing. The Freestate cadets got a workout transforming a bar of steel into a large nail with their initials stamped on it.

This class cycle was the first time our students have been to Local Motors, UNCC and Harford Community College. It won’t be the last. The experiences they gave us made this the best series of Vocational Orientation events we’ve done since we started the 3D ThinkLink Initiative five years ago.

[Show picture list]

Vocational Orientation Shows Students 3D Printing in Action

News
3D ThinkLink students from Freestate and Capital Guardian Youth ChalleNGe Academies visit The Foundery in Baltimore for Vocational Orientation on October 24, 2017

It’s always exciting to take our 3D ThinkLink students beyond their classrooms and show them some of the many ways they can use the CAD (computer-aided design) and 3D printing skills they’re learning.

In October, for the first time, Vocational Orientation for Cadets from Maryland’s Freestate ChalleNGe Academy and DC’s Capital Guardian Youth ChalleNGe Academy included a visit to Terrapin Works, the University of Maryland’s 3D printing center.  

A 3D ThinkLink student from DC's Capital Guardian Youth ChalleNGe Academy examines 3D-printed objects at the University of Maryland's MakerBot Innovation Center in College Park as part of his Vocational Orientation experience on October 24, 2017.
A Capital Guardian Cadet looks at 3D-printed objects at the University of Maryland’s Terrapin Works

Terrapin Works encompasses a collection of digital design and production resources located throughout the College Park campus. The equipment ranges from consumer-grade 3D printers like the ones our students use in class to highly sophisticated, specialized systems that can print objects using all sorts of materials such as plastics, metal, ceramics and even living cells.

The University of Maryland tour included a stop at the Fischell Department of Bioengineering’s Tissue Engineering and Biomaterials Laboratory, where 3D printing helps scientists develop materials that can be implanted in the body. The lab has hosted Vocational Orientation events for us since 2014 and our students are always fascinated to learn how researchers combine life sciences and engineering to create things like bone and blood vessel replacements.

After a busy morning in College Park, the Cadets headed north to Baltimore to spend the afternoon at The Foundery, an industrial makerspace that’s another favorite Vocational Orientation destination.

3D ThinkLink students from Freestate and Capital Guardian Youth ChalleNGe Academies watch a machine cut plates of steel using a high-pressure water jet during a tour of The Foundery in Baltimore as part of their Vocational Orientation experience on October 24, 2017.
Cadets watch a computer-controlled machine cut steel with a high-pressure water jet at The Foundery

At The Foundery, our students see how their knowledge of CAD software gives them opportunities to work in traditional subtractive manufacturing fields as well as the new realm of additive manufacturing. Whether they’re working with a desktop 3D printer, a laser engraver or a giant industrial cutting machine, it all comes down to giving a computer-controlled device the instructions needed to make the object you want.

Even more important for our students than learning about the various machines they saw during Vocational Orientation was meeting the people who use those machines to turn ideas into reality. It was gratifying to watch the personal interaction between the Cadets and the staff members at UMD and The Foundery.

These tours are intended to open the eyes of at-risk teens whose view of career opportunities is often quite limited. By exposing them to new ideas and experiences, we encourage them to see themselves going on to do things they didn’t think were possible. Whatever their goals may be, the thinking skills our 3D ThinkLink Initiative teaches will help our students achieve them.

[Show picture list]

The YouthQuest Foundation Year in Review: 2016

Blog
YouthQuest Director of Instruction Tom Meeks with students in the 3D ThinkLink Creativity Lab

The YouthQuest Foundation reached a milestone in serving at-risk youth as 2016 came to an end.

Capital Guardian Youth ChalleNGe Academy 3D ThinkLink students graduate December 2016
3D ThinkLink students graduate from Capital Guardian Youth ChalleNGe Academy, December 2016

“With December’s graduations in Maryland, South Carolina and Washington, DC, 200 Youth ChalleNGe Academy Cadets now have completed our 3D ThinkLink training,” said YouthQuest Co-Founder and President, Lynda Mann. “It’s been a joy to watch this project grow during the past four years.”

The 3D ThinkLink Initiative helps students develop critical thinking and problem solving skills, creativity and confidence as they learn about 3D design and printing. The knowledge they gain gives our graduates an advantage in the tech-driven job market where demand for 3D design and printing skills is growing fast. Most important, they learn that failure is not final – a lesson that they’ll remember for the rest of their lives.

YouthQuest launched the project at Maryland’s Freestate ChalleNGe Academy in early 2013. Later that year, the District of Columbia’s Capital Guardian Youth ChalleNGe Academy joined, followed by South Carolina Youth ChalleNGe Academy in 2014.

Advanced students assemble JellyBox 3D printer kits in the 3D Thinklink Creativity Lab January 2016
Lab Week January 2016

This year began with eight top graduates participating in a week of advanced training at our 3D ThinkLink Creativity Lab in Chantilly, Virginia. They did hands-on research evaluating 3D scanners and assembling JellyBox 3D printer kits.

Our training for all ChalleNGe Cadets includes a four-hour community service project and a full day of Vocational Orientation visits to businesses and schools where 3D design and printing is used. This year’s destinations included some old favorites such as 3D Systems and the University of Maryland’s Tissue Engineering and Biomaterials Lab, as well as new ones such as The Foundery and Under Armour’s Lighthouse innovation center in Baltimore.

“Being involved in 3D ThinkLink makes me think about the different opportunities I have,” said Freestate grad Josh Nembhard. “Being here gives you a better chance of going somewhere, for example, college or getting a job.”

Our new Youth Mentor Program offers graduates the opportunity to continue their 3D ThinkLInk experience by sharing what they’ve learned with their family, friends and neighbors. Beginning with Immersion Lab Week in January 2017, we will provide the equipment and training for our most qualified students to drive positive change in their communities by serving as Youth Mentors. Funding for the program launched this summer is already halfway to the $15,000 goal.

3D ThinkLink students at Vocational Orientation at University of Maryland Biomaterials Lab
Vocational Orientation at University of Maryland Biomaterials Lab

We also encourage our graduates to continue their education by awarding scholarships to those who write the best essays about how our training has affected them personally.  Four students earned $500 scholarships in 2016; Trevon Ahl and Alycia Freeman from South Carolina Youth ChalleNGe Academy, and Brock Jasmann and Aunya’ Jones from Freestate ChalleNGe Academy.

“3D printing has helped guide me into making better decisions and gave me a new life skill along the way. It has really helped me understand my self-worth because now I know I can design my own future,” Aunya’ wrote in her award-winning essay. “I now see the bigger picture to my life’s problems and I’m not afraid to face them.”

PHILLIPS AND HORIZONS

Building on the success of our work with Youth ChalleNGe Academies, YouthQuest expanded the 3D ThinkLink Initiative to reach more youth programs in 2016

The PHILLIPS Programs for Children and Families began semester-long 3D ThinkLink classes for high school students on the autism spectrum as well as those with mental health issues at its school in Annandale, Virginia, in the spring and will launch classes at its Fairfax campus in early 2017. 

“It’s made a big difference to our staff and to our students,” PHILLIPS Career Partners Director Lindsay Harris said. “These are students that have failed often in the classroom and they don’t always have the confidence that they can learn and be successful. This program really gives them that.”

According to the PHILLIPS Program Final Evaluation Report, the spring pilot program was a success, especially in the areas of student engagement, curriculum implementation and staff support. Lynda Mann credited the excellent work done by the PHILLIPS staff, especially teachers Samuel Son, Jim Field and Marcel Baynes.

“Their ability to recognize the innate creativity in these special-needs youth, and to use the 3D ThinkLink curriculum as a valuable way for the students to express themselves creatively while facilitating growth in critical thinking and problem solving, was brilliant,” she said. 

3D ThinkLink also took root and started growing in Virginia’s Tidewater region this year. We trained teachers and provided the curriculum and materials for Horizons Hampton Roads to run 3D classes for sixth graders as part of its six-week summer enrichment program.

This fall, teacher Franklin Baker used what he learned during the summer to create a course for older students. Horizons’ High School Scholars successfully completed their 3D class in December.

A REWARDING YEAR

2016 Step Up Loudoun Youth winning teams
2016 Step Up winning teams

2016 was the fifth straight year YouthQuest sponsored the Step Up Loudoun Youth Competition.  The event organized by Louduon Youth, Inc. challenges middle school and high school students to identify problems in Loudoun County, Virginia, and create solutions. Local business and civic leaders judge the projects and YouthQuest donates most of the prize money.

This year’s Step Up contest drew more entries than ever and we hope for an even larger field of competitors in 2017.

This year’s many accomplishments would not be possible without YouthQuest’s generous supporters.

The Challenge at Trump National Golf Club August 2016
The Challenge at Trump National

The annual golf tournament was our most successful fundraiser. There were more sponsors than ever and more than 100 players took part in the event on August 8 at Trump National Golf Club’s Championship Course in Potomac Falls, Virginia, recently named one of Golf Digest’s best new private courses.  

At the annual VIP Reception a few days before the tournament, we recognized AOC’s Valerie Hightower as our 2016 Volunteer of the Year. The 2016 Community Partner Award went to Duncan-Parnell, Inc. The Boys & Girls Clubs of Greater Washington received the 2016 Strategic Partner Award.  

Lynda Mann with Volunteer of the Year Valerie Hightower August 2016
Lynda Mann with Volunteer of the Year Valerie Hightower

Donors stepped up during the golf tournament and VIP Reception to get the ball rolling on funding the Youth Mentor Program.

Our participation for the first time in #GivingTuesday, a global celebration of charity on the Tuesday after Thanksgiving, also gave our year-end fundraising a boost.

Contributions are welcome at any time of year, of course. Please click here or contact Operations Manager Juan Louro, who joined us on the first workday of 2016, at juan.louro@youthquestfoundation.org or 703-234-6300.

The Year in Pictures

[Show picture list]

Fall 2016 Scholarship-Winning 3D ThinkLink Student Essays

Blog

These students from the 2016 fall class cycle earned $500 scholarships for these essays about their 3D ThinkLink experience.

By Aunya’ Jones
Freestate ChalleNGe Academy

The YouthQuest 3D printing program has transformed my way of thinking in a variety of ways. Before 3D printing I did not believe in myself, and I had accepted the opinion that I was not good enough. When I initially signed up for 3D printing I did not expect my mindset to change, but thank God it did. Every part of 3D printing took a part in my change specifically speaking, the vocational training. We learned that 3D printing helps make society so much simpler. The employees at Under Armor and students at the University of Maryland help to make other people’s lives better and that inspired me to improve my outlook on life.

Early on in 3D printing, I did not believe that I would be able to make a successful design. Everything seemed so foreign to me. I could barely work the program on the computer. The very first design I made left me feeling shameful. My design on the screen was nothing like what it printed out in reality. Through that experience I learned that I needed to look at the scale of my work. At times, I became frustrated with myself and wanted to give up because my peers’ designs looked better than mine. The disappointment from my first design forced me to make things that I could be proud to show off in my future designs.

I learned to keep my eyes glued to the screen and pay attention to every instruction given by Mr. Meeks. When I had questions I would ask aloud. Every new noun and verb that we learned I tested it on my designs. I was able to use mathematical conversions to figure out what a millimeter looked like off screen and know how it would be once printed.  One day my instructor Mrs. Metzger said that my design was the only successful one to print. It brought me so much joy because that meant that I was finally getting it.

Joining 3D printing has taught me to never give up because you will not be satisfied or get where you are intended to be. Starting something is for a purpose and that purpose is not to quit. 3D printing showed me that I cannot always do things on my own and I have to learn the right way first. Mr. Meeks said, “Mistakes are a part of the process to success,” and that is a quote that I will never forget. I now see the bigger picture to my life’s problems and I’m not afraid to face them. I understand that it was not the destination that mattered but the journey I had to take to make it there. 3D printing did more than teach me how to use a program. 3D printing has helped guide me into making better decisions and gave me a new life skill along the way. It has really helped me understand my self-worth because now I know I can design my own future.

_________________________________________

By Brock Jasmann
Freestate ChalleNGe Academy

3D printing has been a very awe-inspiring experience to me. I have personally benefited from 3D printing by learning that I can make something complex and visually outstanding by using a couple different tools on Moment of Inspiration. I use the Moment of Inspiration program to make my creative designs, but to me it’s more than just a computer program. I say this because, through the service to the community project, I was given the opportunity to go to a library to teach the community about 3D printing.

It was an amazing experience to see how interested and impressed the kids and adults were at the library when we showed them how to make 3D prints. We printed things such as: books, key chains, arrayed stars with faces, and little Lego shaped men. I taught them about how we use additive manufacturing, which is “a process of making three dimensional solid objects from a digital model[1]”. The impact that 3D printing has not only on me but the community is enormous, fun, and educational.

While visiting employees at Bustin Boards, Under Armor Light House, and The Foundery in Baltimore, Maryland during our Vocational Orientation, I learned how they used 3D printing in their skateboards, clothing, and shoes. For example, Under Armor takes virtual images from athletes’ bodies to make custom clothing to fit their body type based off of the 3D scan. This showed me that 3D printing was for more than just creating small items, it is used in technology to make clothing and everyday items.

“While 3D printing has been successfully used in the health care sector to make prosthetic limbs, custom hearing aids and dental fixtures, the technology is now being used to create more complex structures — particularly human tissue”-Cadie Thompson.[2] Another phenomenal production of 3D printing is that scientists at University of Maryland are making fake working environments for cells to thrive in to replace burnt flesh and scars with a foreign body fat. The fat is then used to fit the affected area. The scientist surgically place the healthy host cells on the body to make the scar completely disappear. This effect of 3D printing is revolutionary because now wounded warriors will have a normal life by no longer having scars exposed and they can have realistic looking prosthetic limbs.

I am ecstatic to know that I can make anything if I put my mind to it. Moment of Inspiration has inspired me to learn more about 3D printing and helped me to teach it to my community. 3D printing is important to me because now I can express myself in a form of art that I’m talented in. Also, I am more able to educate my community through my new learned skill in 3D printing. In conclusion, all of these examples are reasons why 3D printing is awe-inspiring to me.

[1] http://3dprinting.com/what-is-3d-printing/

[2] http://www.cnbc.com/id/49348354: Quote cited from CNBC “How 3D Printing is Reshaping Medicine”.

Vocational Orientation Opens Young Eyes to Opportunities

News
Students look at a 3D printed architectural model at 3D Systems in Rock Hill, SC, during 3D ThinkLink Vocational Orientation October 20, 2016

Introducing at-risk youth to 3D design and printing is only one part of YouthQuest’s 3D ThinkLink Initiative. Our larger purpose is to help troubled teens learn to think in new ways and dream big.

One way we do that is through Vocational Orientation events, which are a requirement for completion of the 3D ThinkLink training we provide for National Guard Youth ChalleNGe Programs in South Carolina, Maryland and Washington, DC. Students spend a day touring businesses and universities to see real-world applications for the concepts they’re learning about in class.

During an October 13 Vocational Orientation event, University of Maryland grad student Max Lerner tells 3D ThinkLink students from Maryland and DC about the 3D printers he uses in the Biomaterials and Tissue Engineering Lab.
3D printers in the University of Maryland Biomaterials and Tissue Engineering Lab

Many of the kids we serve have struggled with academics and their life experience is severely limited. Before they enrolled in a ChalleNGe Academy, few imagined themselves pursuing higher education or a career in a STEAM (Science, Technology, Engineering, Art, Math)-related field.

That’s why being in a college lab or a high-tech manufacturing facility for the first time can be a life-changing moment for these at-risk teens. In essays they write about how our 3D ThinkLink training affected their lives, students frequently mention being inspired by something they saw during Vocational Orientation.

In October, our Maryland and DC students enjoyed a full day of eye-opening experiences, starting with a visit to the newly opened City Garage in South Baltimore. The former bus garage has been transformed into a wonderland of innovation, anchored by Under Armour’s Lighthouse, a 35,000-square-foot design and manufacturing center. The UA Lighthouse includes a room equipped with more than 50 cameras for 3D scanning of athletes. Designers use the scans to create individually tailored sportswear. The students also learned that UA uses 3D design and printing to prototype footwear and apparel.

Josh Dunn of Bustin Boards tells 3D ThinkLink students from Maryland and DC how the company designs and builds skateboards during a Vocational Orientation tour in Baltimore on October 13, 2016.
Josh Dunn explains how Bustin Boards makes skateboards

Elsewhere in the City Garage complex, the kids had fun at the Bustin Boards skateboard company. Along with trying out the boards, they discovered that the Moment of Inspiration software they’re learning to use in class is the same type of CAD (Computer Aided Design) program the company’s designers use. That led to a discussion about how CAD skills are needed for both 3D printing, or “additive manufacturing,” in which machines build objects by putting material only where it is needed, and traditional “subtractive manufacturing,” in which machines cut away material to form objects.

All kinds of additive and subtractive manufacturing devices were on display next door at The Foundery, a large makerspace. In the midst of all that modern technology, the kids also got some hands-on experience with one of the oldest manufacturing methods – blacksmithing. After heating, pounding and bending red-hot steel, the kids surely gained an appreciation for 3D software that can turn a simple shape into something useful or decorative with just a few clicks of a mouse.

3D ThinkLink students from South Carolina Youth ChalleNGe Academy examine a 3D printed object during a Vocational Orientation visit at Duncan-Parnell's 3D printing shop in Charlotte on October 20, 2016.
Students visit Duncan-Parnell’s 3D printing shop in Charlotte

Students from South Carolina Youth ChalleNGe Academy also saw additive and subtractive manufacturing processes in action as they visited Duncan-Parnell’s 3D printing department in Charlotte, NC, 3D Systems headquarters in Rock Hill, SC and the University of South Carolina Department of Mechanical Engineering in Columbia.

The medical uses for 3D printing often strike a chord with our 3D ThinkLink students.

The kids from Maryland’s Freestate and DC’s Capital Guardian Youth ChalleNGe Academies were fascinated to see how 3D printing is used to develop things like bone and vascular replacements in the University of Maryland’s Biomaterials and Tissue Engineering Lab.

South Carolina Youth ChalleNGe Academy Cadets look at a display on 3D printing in medicine during Vocational Orientation tour of 3D Systems in Rock Hill, SC, October 20, 2016.
Medical technology display at 3D Systems

At 3D Systems, the South Carolina students learned about the company’s work in the fast-growing specialty of pre-surgery modeling. A 3D Systems team recently worked with doctors at Children’s Hospital at Montefiore in New York who separated baby brothers joined at the head. They were able to plan and practice every step of the complex surgery thanks to precise 3D-printed models made from MRIs and CT scans of the boys’ skulls.

We often remind students that being exposed to new ideas and experiences literally makes their brains grow, as new connections between neurons are formed. Our field trips also open students’ minds and expand their view of what’s possible. Vocational Orientation events make these at-risk teens aware of opportunities they had never imagined. While they may not end up working on the cutting edge of technology, the thinking skills and confidence they develop during their 3D ThinkLink experience will help them make the most of any opportunity they choose to pursue.

[Show picture list]

Scholarship Winners Want to Use 3D Printing to Help Others

News
YouthQuest Co-Founder and President Lynda Mann presents scholarships to 3D ThinkLink essay contest winners Trevon Ahl and Alycia Freeman at South Carolina Youth ChalleNGE Academy

The YouthQuest Foundation has awarded scholarships to two South Carolina Youth ChalleNGe Academy graduates for their essays about how 3D ThinkLink training affected them.

Trevon Ahl and Alycia Freeman, both 17, are among the 16 students who completed the latest cycle of the 3D design and printing course YouthQuest provides at the school for at-risk teens in Eastover, South Carolina.

YouthQuest Co-Founder and President Lynda Mann presented the $500 awards to the essay competition winners during SCYCA’s graduation ceremony on June 8.

Bestselling author John Gilstrap, whose latest novel in the Jonathan Grave thriller series is Friendly Fire, has judged the semi-annual contest since 2014.

“This year’s batch of essays featured two standouts for me, both because they focused not on what the writer got from their introduction to 3D printing, but rather on how they will put their knowledge to work for others,” he said.

3D ThinkLink students from SCYCA attend Vocational Orientation at 3D Systems in Rock Hill, South Carolina on April 21, 2016
SCYCA students at 3D Systems for Vocational Orientation

In his essay, Trevon described the excitement he felt the first time he used Moment of Inspiration design software to transform a flat shape into a 3D digital model that he could print.

He also recalled the Vocational Orientation trip his class took to 3D Systems headquarters in Rock Hill, South Carolina, where he saw high-end printers that go far beyond the simple plastic-extrusion machines he learned to use in class. These professional 3D printers make objects from a variety of materials, including rubber, ceramics and metals.

“When I saw that, I was overall enthusiastic about this new wave of how to use machinery in everyday life that will help others in different ways,” Trevon wrote.

“If I had a 3D titanium printer for my personal use I would make bikes for all the children in my neighborhood,” he added “I’ve seen many kids in my community that walk everywhere and they would be grateful for a bike. I would even have them customize their own bicycle frame and then I`d print it out for them.”

Because he loves to fish, Trevon also said he wanted to 3D print a titanium fishing rod and “catch so many fish I would be able to share with the people in my community so we would all be able to enjoy a good fish fry.”

The $500 scholarship will help Trevon achieve his post-ChalleNGe goal of attending a technical college to earn a welding certificate. His fellow winner Alycia plans to study surgical technology at Savannah Technical College.

South Carolina Youth ChalleNGE Academy 3D ThinkLink students Hailey Key, Asia Grant and Alycia Freeman examine 3D printed objects during Vocational Orientation at 3D Systems in Rock Hill, South Carolina on April 21, 2016
Hailey Key, Asia Grant and Alycia Freeman examine 3D printed objects during Vocational Orientation

“Alycia’s story was quite touching,” John Gilstrap said.

Her dad was doing drugs and her parents divorced when she was 13. She moved five times and skipped school often, spending most days caring for her ailing grandmother instead of going to class.

“I then started to follow in my father’s footsteps,” Alycia wrote. “About a year later, I knew I had to be successful. I didn’t want to be a product of my environment.”

That’s when she decided to enroll in SCYCA. Being in the 3D ThinkLink class helped Alycia get re-engaged in education.

Like Trevon, Alycia said the visit to 3D Systems showed her how she can use the technology she learned about in class for the benefit of others. She was inspired to see the many ways 3D printing is used in health care.

“Being that I took care of my grandmother, I want to help others live a better life in every way possible,” she explained. “3D printing encouraged me to become a surgical nurse. … I’m now motivated and determined to go to school and get into the medical field and actually complete it!”

CLICK HERE to read the complete essays

Spring 2016 Scholarship-Winning 3D ThinkLink Student Essays

Blog

These students from the 2016 fall class cycle earned $500 scholarships for these essays about their 3D ThinkLink experience.

By Trevon Ahl
South Carolina Youth ChalleNGe Academy

When I entered into the room with the other cadets for class and was seated we were then shown several hands-on videos that we followed along with our individual laptops. Secondly, we learned how to extrude a 3-dimensional object. Extrude means when you have an object that is flat on the plane (Moment of Inspiration). You can extrude the object and basically make it stand up. Just the sight of seeing a shape that was flat, then it stood up made me feel excited! I didn’t think that was going to happen when I began the lesson.

3D printing is important to me in many ways. If you love dogs like I do you can make multiple items for your dogs, such as dog tags, prosthetic legs, prosthetic tails, prosthetic ears, etc. Also, you can make varieties of telephone cases for the different types of phones that are out there.

When Mr. Johnson and Tom Meeks said to us as a class that ‘’3D printing is about turning 2D objects to 3D objects and printing them to a real life situation that can be useful to many people and/or different industries.’’ When our 3D printing class visited 3D Systems in Rock Hill, S.C. we learned that there are many different types of 3D printers. Some 3D printers print in porcelain, titanium, powder and plastic. Yes, I know what you are thinking: powder? The machine hardens the powder; then when you make your shape or objects it dips your shape into the super glue and become hardened into the shape that you are making.

3D is the new type of manufacturing. They even made a car frame that looked like a Lamborghini. The New Balance shoe company now has a pair of tennis shoes that the soles of them are made with 3D printing technology. When I saw that I was overall enthusiastic about this new wave of how to use machinery in everyday life that will help others in different ways!

If I had a 3D titanium printer for my personal use I would make bikes for all the children in my neighborhood. I’ve seen many kids in my community that walk everywhere and they would be grateful for a bike.  I would even have them customize their own bicycle frame and then I`d print it out for them.

I would love to also make a titanium fishing rod because I love to fish. Once I catch so many fish I would be able to share with the people in my community so we would all be able to enjoy a good fish fry.

_________________________________________

By Alycia Freeman
South Carolina Youth ChalleNGe Academy

I’m Cadet Freeman from Beaufort, South Carolina. I grew up on St. Helena Island. My parents got divorced when I was 13 years old because my father was more interested in drugs than he was into having a relationship with my mother.

I got pulled out of school a lot and moved about 5 times. My grades started to plummet and I was told I wouldn’t be able to obtain my high school diploma. This was due to all the days that I had missed.

I began taking care of my grandmother who got sick and she had to have a knee replacement. My grandmother started back walking after surgery but still needed assistance. She passed away a couple months later due to other complications. I was still in school at the time but I only went about twice a week.

I then started to follow in my father’s footsteps. I no longer wanted to be around people. About a year later I knew I had to be successful. I didn’t want to be a product of my environment. I heard about SCYCA through a family member. I asked my mother did she think it was a good way to try and get my G.E.D. Her response was, “Absolutely!” She was very surprised and proud of my decision.

My way of thinking and mindset made a 360 degree turn while attending the program for these five months. I’m now motivated and determined to go to school and get into the medical field and actually complete it!

My favorite part that I thought was most interesting and cool was applying 3D technology to the field that I want to take up at Savannah Tech. I learned many things about 3D printing that I was not aware of. I found it interesting that tests on mice with 3D printed objects showed that there were no signs of cells dying in their tissues. I also learned at 3D Systems people who do additive manufacturing print organs, stem cells, bones and even surgical tools. I feel like every disabled person deserves to enjoy a normal life.

Being that I took care of my grandmother, I want to help others live a better life in every way possible. 3D printing encouraged me to become a surgical nurse. When I become a surgical nurse I will then be able to insert/place replacement bones, organs, etc. in different areas of the human body.

I also want to take my career further so that I can be an additive manufacturer. Not to mention other things I could create such as shoe soles, car parts, skeletal parts, foods, and models with different types and sizes of 3D printers. 3D printing will become even more popular in the future and I would like to advance my experience.

Students Explore 3D Printing Beyond the Classroom

News
3D ThinkLink students from DC's Capital Guardian Youth ChalleNGe Academy visit the University of Maryland's Tissue Engineering Lab during Vocational Orientation in April 2016

Vocational Orientation is an important part of YouthQuest’s 3D ThinkLink training because it shows students some of the ways they can use the skills they’re learning in class.

In April, 3D ThinkLink students from Maryland’s Freestate, the District of Columbia’s Capital Guardian and South Carolina Youth ChalleNGe Academies visited businesses and universities to:

  • Deepen their understanding of 3D printing technology;
  • Learn about career opportunities in related fields;
  • Meet people who use 3D design and printing in their occupations;
  • See teamwork, creative thinking and problem solving in action.

At the Rock Hill, S.C., headquarters of our 3D ThinkLink Strategic Partner, 3D Systems, the South Carolina cadets learned about 3D printing’s explosive growth in areas ranging from medicine, automotive and aerospace engineering to fashion and entertainment. Director of Corporate Communications Tim Miller led a tour showing the full line of 3D Systems products and explaining the special applications for each machine. The students, who have only simple, desktop plastic-extrusion 3D printers in their classrooms, were amazed by the variety of printing methods and materials available.

Duncan-Parnell's Camren Summerlin shows students a 3D-printer
Duncan-Parnell’s Camren Summerlin shows students a 3D printer

The SCYCA students began their Vocational Orientation Day with a visit to a business that uses many 3D Systems products in its work with civil engineering clients, Duncan-Parnell in Charlotte, N.C. The staff showed them some of the latest 3D printers and talked about jobs available for operators who have the skills to produce high-quality 3D models. Applications Engineer Camren Summerlin also encouraged the students to consider repairing and maintaining 3D printers as a career.

The day wrapped up in Columbia with a tour of the University of South Carolina’s Department of Mechanical Engineering. Graduate Director Dr. David Rocheleau explained how mechanical engineers “make things and break things” – analyzing the strengths and weakness of materials in research to create better, safer products. In addition to 3D printers, the students saw engineering tools such as a wind tunnel, a century-old milling machine and a huge device that can cut through practically anything using a high-pressure stream of water.

UMD grad student Bao Nguyen explains how this 3D-printed scaffold is used to create a hip bone replacement.
UMD grad student Bao Nguyen explains how this 3D-printed scaffold is used to create a hip bone replacement.

The Maryland and DC students learned about 3D printing’s role in a very different kind of engineering during their visit to the University of Maryland in College Park. They met Laurie Bracaglia, Charlotte Piard, Bao Nguyen and other graduate students in the Tissue Engineering and Biomaterials Lab who are developing innovations such as human bone replacements. The researchers use 3D printing to build delicate forms around which bone cells will grow. The cadets took part in hands-on demonstrations of an emerging technology that would have seemed like science fiction not so long ago.

Our students also discovered how 3D printing fits into the invention process when they  toured Prototype Productions, Inc., in Ashburn, VA, another 3D ThinkLink Strategic Partner. Chief Operating Officer Italo Travez and his staff explained that everyone at PPI – designers, engineers and machine operators – share ideas and work together to find innovative solutions to customers’ needs.

During Vocational Orientation for 3D ThinkLink students from Maryland and DC in April 2016, Prototype Productions COO Italo Travez demonstrates products PPI developed
PPI’s Italo Travez demonstrates some of the products his company developed

Mr. Travez, who emigrated from Ecuador with his family when he was a child, also shared personal stories about what drove him to become a mechanical engineer and how he and his brother, Joe, built their small family business into a state-of-the-art prototyping operation that has developed hundreds of products.

There was even a side-order of innovation during a lunch break at Topgolf Loudoun in Ashburn. Director of Sales Cassandra Taylor led a tour of the facility that puts a high-tech spin on the traditional driving range. Players hit golf balls embedded with RFID (radio frequency identification) chips into targets equipped with sensors that read the chips and send the scoring data back to the players. Although most of the cadets had never touched a golf club, they had fun giving Topgolf a try.

The at-risk teens in our 3D ThinkLink classes typically have a narrow view of the world and their place in it. Many have never been to a high-tech workshop or a major university campus. These Vocational Orientation events help open students’ eyes to what’s possible for them as they plan their next steps into adulthood.

[Show picture list]

1 2