Four students who completed 3D ThinkLink training at National Guard Youth ChalleNGe Academies have earned scholarships to help them take the next steps on their career paths.
Jacob Foote at Capital Guardian graduation / Photo by DC National Guard
3D students compete for scholarships by writing essays about the personal impact our class had on them. All four of the winners in this latest class cycle said the 3D ThinkLink experience opened their eyes to job opportunities they had never imagined.
“Taking 3D printing has sparked my creativity. I love the fact that it gets my imagination going,” wrote Bradley, who hopes to pursue an engineering associate’s degree at Harford Community College.
“This program has changed my mind on what I want to do after Freestate. I never had an actual passion in life, but I want this to be my career,” he explained. “It’s crazy how a few months can affect the rest of your life.”
Dante’s essay focused on his interest in becoming a graphic designer.
“My 3D ThinkLink experience was a positive experiment for me because it shone some light of a future opportunity for me working in the graphic design industry or something that could involve 3D printing because I would already know how to work with the 3D printers,” Dante wrote.
The Capital Guardian class trips to the University of Maryland’s 3D printing facilities and the USA Science & Engineering Festival in Washington, DC, made a big impression on Jacob.
“It showed me that I have the skills to continue my education and use it in my future as a 3D designer,” said Jacob in his scholarship-winning essay.
Cadets Haney and Foote at 3D ThinkLink advanced training
Like Jacob, Trevor was one of the top students in his 3D class and attended advanced training sessions in May at our 3D ThinkLink Creativity Lab in Chantilly, Virginia.
“When I started Freestate, I didn’t have enthusiasm about my life,” Trevor recalled in his essay. “Getting accepted into 3D printing was one of the first things that brought me hope at Freestate. In every class we have, I learn something new, which makes me very intrigued about the next class.”
Trevor credited our class for motivating him to have a positive attitude and stick with the rigorous 22-week residential program at Freestate. He took our failure-is-not-final message to heart and learned that “hard work pays off.”
Trevor’s hard work paid off in the form of several awards, in addition to our scholarship, that were presented to him at Freestate’s graduation ceremony in Joppa, Maryland. Now he’s planning to join the Army and find a position that will allow him to apply the 3D skills he learned in our class.
Our semiannual essay contest is judged by New York Times bestselling author John Gilstrap, whose latest novel in the Jonathan Grave thriller series is Scorpion Strike.
Since 2013, YouthQuest has awarded a total of $9,500 in scholarships to 19 essay contest winners.
“We want to give them the best tools and motivate them to learn how to use those tools so they can be the best teachers for the at-risk students we serve,” explained YouthQuest Director of Instruction Tom Meeks.
“I’m always happy when I come out here,” said Keith, who’s been a 3D ThinkLink teacher from the beginning in 2013, when we launched our project to use 3D printing as a vehicle for teaching critical thinking and problem solving skills to at-risk youth.
Teachers learn about the M3D Micro
He praised the individual attention Tom provided during the training sessions, which included an introduction to new equipment such as the M3D Micro printer. The Micro is more versatile than the 3D Systems Cube printers we’ve used in classrooms for years and gives teachers more control over printing options.
Tom and the teachers also reviewed the new structure of the 3D ThinkLink curriculum. Based on the results from previous class cycles, we’ve reorganized the curriculum into blocks of four to five lessons, each of which which culminates with a benchmark project that involves all the skills students should have mastered by that point.
Jamarr, who’s in his second class cycle of 3D ThinkLink teaching, thinks the new structure will help his students at Freestate stay on pace from week to week. He said the benchmark projects should show him if students have missed something important before they move ahead in the curriculum.
Tom Meeks introduces Moment of Inspiration 3D design software to Freestate’s Jonathan Brown
Jonathan, our newest 3D ThinkLink teacher at Freestate, was hesitant to get involved in the project at first because he wasn’t sure he could devote the time and effort it takes to learn about the software and hardware. But when he spent a week in our lab as a chaperone for two Freestate Cadets who completed advanced training this summer, he was convinced.
“When I saw how quick the kids grasped it and how much fun they had with it, I said I’m absolutely coming back,” Jonathan recalled.
As soon as a teaching position opened up, he volunteered. Within weeks, Jonathan was back in our lab working closely with Tom to become a 3D ThinkLink teacher.
“I’m here early every day because I’m looking forward to what we’re going to pick up today. And Tom has matched all of my intensity,” he said. “I’m looking forward to the challenge of trying to be creative and seeing where my mind takes it.”
Tom will travel to the South Carolina Youth ChalleNGe Academy in Eastover next week to provide training for new teachers.
“As far as I’m concerned, this was the most successful immersion experience we’ve done,” said YouthQuest Director of Instruction Tom Meeks. “We were totally focused this time on how to use their skills to be mentors to young people in their families and neighborhoods, and how to work in the community to demonstrate what 3D design and printing is.”
The 3D ThinkLink Initiative uses instruction in 3D design and printing as a vehicle for teaching at-risk youth about critical thinking, problem solving, creativity and confidence. The Youth ChalleNGe Program, run by the National Guard, gives dropouts a second chance to get their lives back on track and earn a high school degree.
Advanced students work in the 3D ThinkLink Creativity Lab
For teens who have struggled in school, the experience of learning something cool like 3D printing and teaching it to others does wonders for their self-esteem.
“Now I can do things to help people who were in my shoes,” said Freestate Cadet David Kelly, 16, from Baltimore.
During daylong sessions in the lab, our advanced students became thoroughly familiar with the setup, operation and troubleshooting of the M3D Micro 3D printers they’ll be using as mentors. They also worked with new types of materials they hadn’t used in their on-campus classes, such flexible and color-changing filaments.
For the first time, the students made designs to be built in the lab’s full-color powder bed printer, so they could experience a professional level of 3D printing.
Staying motivated all week was no problem for these students. After a full day in the lab, they would take their laptop computers back to their hotel rooms and work on designs until 9:00 or 10:00 at night, then come back the next morning eager to print their creations.
‘It’s Like Therapy’
All four cadets said being involved in our program benefited them in ways that go far beyond gaining technical skills. They described 3D ThinkLink class as a respite from the regimented life at their ChalleNGe academies, where they spent 5 ½ months away from home.
David Kelly holds a frame for a fidget spinner he 3D printed
David explained that he would get frustrated in other classes sometimes, but having the opportunity to use his imagination and design whatever he liked in 3D class every week always made him feel better.
“Making stuff calmed me down,” he said. “Whenever I make new things, I generally get happy. It lightens my mood.”
The same was true for Capital Guardian Cadet LaMarcus Corley.
“It has helped me control my anger,” the 17 year old from Washington, DC, wrote in a scholarship-winning essay about his 3D ThinkLink experience. “When I come to class, my whole mood changes. I become happy because I know that I’m in a good place.”
Adrian Vasquez uses Moment of Inspiration 3D design software
LaMarcus also said our class brought out the creativity he used to keep “all bottled in” and taught him how to “think about stuff differently.”
“It helped me with focusing more — paying attention to detail, getting everything right,” said Freestate Cadet Stephen Brown, 16, from Upper Marlboro, Maryland. “It taught me to never give up and to focus on your goal.”
It also helped keep them out of trouble. All the cadets said they appreciated being chosen for the 3D ThinkLink program and enjoyed it so much that they wouldn’t risk being kicked out for misbehaving.
Before he enrolled at Capital Guardian, Cadet Adrian Vasquez said, he had problems in school.
“I would get good grades, but my mind would always be on something else. So I got caught up with stuff I wasn’t supposed to be around,” the 16-year-old from DC said. “But ever since I started 3D, my mind has been nowhere near that stuff.”
“It’s like therapy, a type of therapy. Working on 3D designs keeps me focused, not on the other nonsense stuff,” Adrian explained.
“And my mom is cheering me on,” he added. “She’s seen all the posts about us on Facebook and she’s never been so happy. She knows the rough times I had.”
Thinking Differently About the Future
The 3D ThinkLink experience opened these at-risk teens’ eyes to new opportunities and changed their view of what’s possible for them.
“I’ve never really been so confident about the things I’m doing,” said Adrian, who plans to become a master automotive technician.
Stephen Brown checks one of his designs printing on an M3D Micro
Stephen is aiming for a career as a fashion designer and entrepreneur. With 3D printing playing an ever-increasing role in the fashion industry, he realizes the value of the hands-on experience he gained in our classes.
“It really helped me think outside the box and I can use that to my advantage in the future,” he said. “As I pursue my career, the 3D printer will really help me print out prototypes of designs.”
Learning 3D printing gave LaMarcus a new perspective about his options after graduating from Capital Guardian and he’s looking forward to being a Youth Mentor.
“I know it changed me, so I want to make a change in people’s lives,” he said.
So does Adrian, who was reminded of the importance of giving back when he discovered how 3D-printed prosthetic devices help people who’ve lost limbs.
“I had a mindset thinking that this was just for me or for my family,” he explained. “It’s not always for yourself. You can always improve someone else’s life.”
LaMarcus Corley uses the lab’s full-color powder printer for the first time
The work these students do as Youth Mentors will support YouthQuest’s goal of reducing America’s dropout rate.
David hopes the children he reaches will share his excitement about 3D printing and decide to learn more about it.
“This isn’t easy stuff. There’s a bunch of math in it, so you really have to stay in school to understand this,” he said.
David added that he’s eager to inspire younger kids “because they’re going to be the future for us.”
“I understand I’m the future now, but they’re going to be the future for me.”
“I love it!” Dalonta, 21, told us in a phone call from the campus in Louisville.
He’s attending Kentucky on a basketball scholarship and plans to double-major in architecture and computer graphics. As if that’s not enough, this energetic freshman is also working on his autobiography.
“I’m writing a book. It’s basically about my life and how I grew up,” Dalonta said. “I’ve got eight chapters already.”
Dalonta Crudup (third from left) with other members of the first 3D ThinkLink class at Capital Guardian
There’s plenty of compelling material for the story of how he went from the streets of DC to the campus of UK; problems in high school, the killing of his best friend, a life-changing 22 weeks at Capital Guardian, completing high school and prep school, earning a full scholarship to play for one of the nation’s winningest basketball teams. And that’s just the last four years.
His experience in our 3D design and printing class at CGYCA is part of Dalonta’s story, too.
“I do tell people about 3D class. When I tell people my name and you look up Dalonta Crudup on Google, my picture pops up in the 3D printing class,” he said. “And I tell them taking that class has helped me a lot because it showed me how get through obstacles in life.”
3D ThinkLink taught him not to give up, to ask for help and “keep trying until it’s done.” Dalonta said the experience gave him the confidence to take on other challenges.
He fell short of passing his GED exam by a few points at Capital Guardian, so he enrolled in high school in Frenchburg, Kentucky, and earned his diploma. Then it was on to Ridgeview Preparatory and Sports Academy in Hickory, North Carolina, to hone his skills as a point guard and shooting guard while taking classes to get ready for college-level academics. In his first year at the University of Kentucky, he’s been working to recover from a knee injury so he can start playing for legendary coach John Calipari next season.
Besides basketball, architecture has been part of Dalonta’s plan for years.
“I want to build my own house from the ground up,” he told us at CGYCA in 2013 when he was 17.
Looking back now, Dalonta said, learning to use CAD (computer-aided design) software in our class helped convince him that he could handle architecture and design classes in college.
“After I learned 3D in class, I kept on doing it,” he said. “I actually practiced at home with a program I use on my laptop computer.”
A FINAL PROJECT, A LASTING LESSON
Dalonta’s strongest memory from 3D ThinkLink class was creating a tribute to his best friend, Malik Spears – known as “Wiz” – who was fatally shot the day Dalonta entered CGYCA.
“He was like a brother and I was with him every single day,” Dalonta recalled. “I was very sad. I was very frustrated.”
Toward the end of the class cycle, Dalonta found an outlet for his emotions when the 3D ThinkLink students got their final assignment. They had to use the skills they’d learned to create any kind of ornament they liked.
Dalonta decided to make a memorial to Wiz with a poem he’d written about his friend. He wanted to make something that would “show appreciation from me to his family.”
3D printing projects rarely turn out right the first time and putting text on an object can be especially tricky. It took three weeks for Dalonta to perfect his ornament.
“I was getting mad because we printed a lot and the words kept being smashed together and we had to keep switching up the size and the font to make sure you could read each and every letter and every word,” he explained.
Dalonta’s persistence paid off a few weeks later when he gave the ornament to Wiz’s mother for Christmas.
“She actually started crying,” he said. “It was a candlelight service and I stood in the middle of the crowd and read the poem.”
Rest in Peace, Wiz. We miss you.
We thought of you with love today
But that is nothing new.
We thought about you yesterday
And days before that, too.
Dalonta’s experience helped YouthQuest Director of Instruction Tom Meeks realize the importance of teaching our students to use text in their 3D designs. Now it’s one of the first things they learn because students always want to personalize items with names or initials and give them to someone they love. Giving at-risk kids the skills and tools to create things that are emotionally meaningful motivates them to work through problems and achieve success.
“I used to be worried all about myself. Now, I think different. I look at life different.” Dalonta said. “I worry about myself still, but now I worry about others around me, too. “
The YouthQuest Foundation reached a milestone in serving at-risk youth as 2016 came to an end.
3D ThinkLink students graduate from Capital Guardian Youth ChalleNGe Academy, December 2016
“With December’s graduations in Maryland, South Carolina and Washington, DC, 200 Youth ChalleNGe Academy Cadets now have completed our 3D ThinkLink training,” said YouthQuest Co-Founder and President, Lynda Mann. “It’s been a joy to watch this project grow during the past four years.”
The 3D ThinkLink Initiative helps students develop critical thinking and problem solving skills, creativity and confidence as they learn about 3D design and printing. The knowledge they gain gives our graduates an advantage in the tech-driven job market where demand for 3D design and printing skills is growing fast. Most important, they learn that failure is not final – a lesson that they’ll remember for the rest of their lives.
This year began with eight top graduates participating in a week of advanced training at our 3D ThinkLink Creativity Lab in Chantilly, Virginia. They did hands-on research evaluating 3D scanners and assembling JellyBox 3D printer kits.
Our training for all ChalleNGe Cadets includes a four-hour community service project and a full day of Vocational Orientation visits to businesses and schools where 3D design and printing is used. This year’s destinations included some old favorites such as 3D Systems and the University of Maryland’s Tissue Engineering and Biomaterials Lab, as well as new ones such as The Foundery and Under Armour’s Lighthouse innovation center in Baltimore.
“Being involved in 3D ThinkLink makes me think about the different opportunities I have,” said Freestate grad Josh Nembhard. “Being here gives you a better chance of going somewhere, for example, college or getting a job.”
Our new Youth Mentor Program offers graduates the opportunity to continue their 3D ThinkLInk experience by sharing what they’ve learned with their family, friends and neighbors. Beginning with Immersion Lab Week in January 2017, we will provide the equipment and training for our most qualified students to drive positive change in their communities by serving as Youth Mentors. Funding for the program launched this summer is already halfway to the $15,000 goal.
Vocational Orientation at University of Maryland Biomaterials Lab
We also encourage our graduates to continue their education by awarding scholarships to those who write the best essays about how our training has affected them personally. Four students earned $500 scholarships in 2016; Trevon Ahl and Alycia Freeman from South Carolina Youth ChalleNGe Academy, and Brock Jasmann and Aunya’ Jones from Freestate ChalleNGe Academy.
“3D printing has helped guide me into making better decisions and gave me a new life skill along the way. It has really helped me understand my self-worth because now I know I can design my own future,” Aunya’ wrote in her award-winning essay. “I now see the bigger picture to my life’s problems and I’m not afraid to face them.”
PHILLIPS AND HORIZONS
Building on the success of our work with Youth ChalleNGe Academies, YouthQuest expanded the 3D ThinkLink Initiative to reach more youth programs in 2016
“It’s made a big difference to our staff and to our students,” PHILLIPS Career Partners Director Lindsay Harris said. “These are students that have failed often in the classroom and they don’t always have the confidence that they can learn and be successful. This program really gives them that.”
“Their ability to recognize the innate creativity in these special-needs youth, and to use the 3D ThinkLink curriculum as a valuable way for the students to express themselves creatively while facilitating growth in critical thinking and problem solving, was brilliant,” she said.
3D ThinkLink also took root and started growing in Virginia’s Tidewater region this year. We trained teachers and provided the curriculum and materials for Horizons Hampton Roads to run 3D classes for sixth graders as part of its six-week summer enrichment program.
This fall, teacher Franklin Baker used what he learned during the summer to create a course for older students. Horizons’ High School Scholars successfully completed their 3D class in December.
A REWARDING YEAR
2016 Step Up winning teams
2016 was the fifth straight year YouthQuest sponsored the Step Up Loudoun Youth Competition. The event organized by Louduon Youth, Inc. challenges middle school and high school students to identify problems in Loudoun County, Virginia, and create solutions. Local business and civic leaders judge the projects and YouthQuest donates most of the prize money.
This year’s Step Up contest drew more entries than ever and we hope for an even larger field of competitors in 2017.
This year’s many accomplishments would not be possible without YouthQuest’s generous supporters.
The Challenge at Trump National
The annual golf tournament was our most successful fundraiser. There were more sponsors than ever and more than 100 players took part in the event on August 8 at Trump National Golf Club’s Championship Course in Potomac Falls, Virginia, recently named one of Golf Digest’s best new private courses.
At the annual VIP Reception a few days before the tournament, we recognized AOC’s Valerie Hightower as our 2016 Volunteer of the Year. The 2016 Community Partner Award went to Duncan-Parnell, Inc. The Boys & Girls Clubs of Greater Washington received the 2016 Strategic Partner Award.
Lynda Mann with Volunteer of the Year Valerie Hightower
Donors stepped up during the golf tournament and VIP Reception to get the ball rolling on funding the Youth Mentor Program.
Our participation for the first time in #GivingTuesday, a global celebration of charity on the Tuesday after Thanksgiving, also gave our year-end fundraising a boost.
Introducing at-risk youth to 3D design and printing is only one part of YouthQuest’s 3D ThinkLink Initiative. Our larger purpose is to help troubled teens learn to think in new ways and dream big.
One way we do that is through Vocational Orientation events, which are a requirement for completion of the 3D ThinkLink training we provide for National Guard Youth ChalleNGe Programs in South Carolina, Maryland and Washington, DC. Students spend a day touring businesses and universities to see real-world applications for the concepts they’re learning about in class.
3D printers in the University of Maryland Biomaterials and Tissue Engineering Lab
Many of the kids we serve have struggled with academics and their life experience is severely limited. Before they enrolled in a ChalleNGe Academy, few imagined themselves pursuing higher education or a career in a STEAM (Science, Technology, Engineering, Art, Math)-related field.
That’s why being in a college lab or a high-tech manufacturing facility for the first time can be a life-changing moment for these at-risk teens. In essays they write about how our 3D ThinkLink training affected their lives, students frequently mention being inspired by something they saw during Vocational Orientation.
In October, our Maryland and DC students enjoyed a full day of eye-opening experiences, starting with a visit to the newly opened City Garage in South Baltimore. The former bus garage has been transformed into a wonderland of innovation, anchored by Under Armour’s Lighthouse, a 35,000-square-foot design and manufacturing center. The UA Lighthouse includes a room equipped with more than 50 cameras for 3D scanning of athletes. Designers use the scans to create individually tailored sportswear. The students also learned that UA uses 3D design and printing to prototype footwear and apparel.
Josh Dunn explains how Bustin Boards makes skateboards
Elsewhere in the City Garage complex, the kids had fun at the Bustin Boards skateboard company. Along with trying out the boards, they discovered that the Moment of Inspiration software they’re learning to use in class is the same type of CAD (Computer Aided Design) program the company’s designers use. That led to a discussion about how CAD skills are needed for both 3D printing, or “additive manufacturing,” in which machines build objects by putting material only where it is needed, and traditional “subtractive manufacturing,” in which machines cut away material to form objects.
All kinds of additive and subtractive manufacturing devices were on display next door at The Foundery, a large makerspace. In the midst of all that modern technology, the kids also got some hands-on experience with one of the oldest manufacturing methods – blacksmithing. After heating, pounding and bending red-hot steel, the kids surely gained an appreciation for 3D software that can turn a simple shape into something useful or decorative with just a few clicks of a mouse.
Students visit Duncan-Parnell’s 3D printing shop in Charlotte
Students from South Carolina Youth ChalleNGe Academy also saw additive and subtractive manufacturing processes in action as they visited Duncan-Parnell’s 3D printing department in Charlotte, NC, 3D Systems headquarters in Rock Hill, SC and the University of South Carolina Department of Mechanical Engineering in Columbia.
The medical uses for 3D printing often strike a chord with our 3D ThinkLink students.
The kids from Maryland’s Freestate and DC’s Capital Guardian Youth ChalleNGe Academies were fascinated to see how 3D printing is used to develop things like bone and vascular replacements in the University of Maryland’s Biomaterials and Tissue Engineering Lab.
Medical technology display at 3D Systems
At 3D Systems, the South Carolina students learned about the company’s work in the fast-growing specialty of pre-surgery modeling. A 3D Systems team recently worked with doctors at Children’s Hospital at Montefiore in New York who separated baby brothers joined at the head. They were able to plan and practice every step of the complex surgery thanks to precise 3D-printed models made from MRIs and CT scans of the boys’ skulls.
We often remind students that being exposed to new ideas and experiences literally makes their brains grow, as new connections between neurons are formed. Our field trips also open students’ minds and expand their view of what’s possible. Vocational Orientation events make these at-risk teens aware of opportunities they had never imagined. While they may not end up working on the cutting edge of technology, the thinking skills and confidence they develop during their 3D ThinkLink experience will help them make the most of any opportunity they choose to pursue.
Vocational Orientation is an important part of YouthQuest’s 3D ThinkLink training because it shows students some of the ways they can use the skills they’re learning in class.
In April, 3D ThinkLink students from Maryland’s Freestate, the District of Columbia’s Capital Guardian and South Carolina Youth ChalleNGe Academies visited businesses and universities to:
Deepen their understanding of 3D printing technology;
Learn about career opportunities in related fields;
Meet people who use 3D design and printing in their occupations;
See teamwork, creative thinking and problem solving in action.
At the Rock Hill, S.C., headquarters of our 3D ThinkLink Strategic Partner, 3D Systems, the South Carolina cadets learned about 3D printing’s explosive growth in areas ranging from medicine, automotive and aerospace engineering to fashion and entertainment. Director of Corporate Communications Tim Miller led a tour showing the full line of 3D Systems products and explaining the special applications for each machine. The students, who have only simple, desktop plastic-extrusion 3D printers in their classrooms, were amazed by the variety of printing methods and materials available.
Duncan-Parnell’s Camren Summerlin shows students a 3D printer
The SCYCA students began their Vocational Orientation Day with a visit to a business that uses many 3D Systems products in its work with civil engineering clients, Duncan-Parnell in Charlotte, N.C. The staff showed them some of the latest 3D printers and talked about jobs available for operators who have the skills to produce high-quality 3D models. Applications Engineer Camren Summerlin also encouraged the students to consider repairing and maintaining 3D printers as a career.
The day wrapped up in Columbia with a tour of the University of South Carolina’s Department of Mechanical Engineering. Graduate Director Dr. David Rocheleau explained how mechanical engineers “make things and break things” – analyzing the strengths and weakness of materials in research to create better, safer products. In addition to 3D printers, the students saw engineering tools such as a wind tunnel, a century-old milling machine and a huge device that can cut through practically anything using a high-pressure stream of water.
UMD grad student Bao Nguyen explains how this 3D-printed scaffold is used to create a hip bone replacement.
The Maryland and DC students learned about 3D printing’s role in a very different kind of engineering during their visit to the University of Maryland in College Park. They met Laurie Bracaglia, Charlotte Piard, Bao Nguyen and other graduate students in the Tissue Engineering and Biomaterials Lab who are developing innovations such as human bone replacements. The researchers use 3D printing to build delicate forms around which bone cells will grow. The cadets took part in hands-on demonstrations of an emerging technology that would have seemed like science fiction not so long ago.
Our students also discovered how 3D printing fits into the invention process when they toured Prototype Productions, Inc., in Ashburn, VA, another 3D ThinkLink Strategic Partner. Chief Operating Officer Italo Travez and his staff explained that everyone at PPI – designers, engineers and machine operators – share ideas and work together to find innovative solutions to customers’ needs.
PPI’s Italo Travez demonstrates some of the products his company developed
Mr. Travez, who emigrated from Ecuador with his family when he was a child, also shared personal stories about what drove him to become a mechanical engineer and how he and his brother, Joe, built their small family business into a state-of-the-art prototyping operation that has developed hundreds of products.
There was even a side-order of innovation during a lunch break at Topgolf Loudoun in Ashburn. Director of Sales Cassandra Taylor led a tour of the facility that puts a high-tech spin on the traditional driving range. Players hit golf balls embedded with RFID (radio frequency identification) chips into targets equipped with sensors that read the chips and send the scoring data back to the players. Although most of the cadets had never touched a golf club, they had fun giving Topgolf a try.
The at-risk teens in our 3D ThinkLink classes typically have a narrow view of the world and their place in it. Many have never been to a high-tech workshop or a major university campus. These Vocational Orientation events help open students’ eyes to what’s possible for them as they plan their next steps into adulthood.
Eight young people who spent a week in our 3D ThinkLink Creativity Lab this month learned new skills and took part in hands-on research that will benefit other 3D printing enthusiasts.
“Not only did our students broaden their 3D design and printing experience by exploring the complexities of full-color 3D printing workflows, they provided valuable early feedback for the developers and manufacturers of two new 3D technologies,” said YouthQuest Director of Instruction Tom Meeks.
Amadou Abakar watches his 3D design take shape on a Cube 2 printer
They were selected for Lab Week because of their outstanding performance in the latest cycle of 3D ThinkLink classes at National Guard Youth ChalleNGe Academies serving South Carolina, Maryland and the District of Columbia. YouthQuest provides the equipment, curriculum and training for the residential academies to help at-risk teens develop critical thinking and problem solving skills through 3D design and printing.
It was the largest group so far to receive 40 hours of advanced training in our Chantilly, Virginia, facility. Unlike the typical maker space, the 3D ThinkLink Creativity Lab is dedicated solely to 3D design, scanning and printing. It is a true laboratory environment designed to promote comparative analysis and develop creative solutions.
The students were the first to experience the lab’s new 3D scanning and printing capabilities, and the first to assemble a unique 3D printer kit.
Going With the Workflow
The week began with an introduction to Cubify Sculpt, a type of 3D design software the students had never tried.
John Smith uses Cubify Sculpt to design the head for a monster figurine
In their classes at school, they used Moment of Inspiration (MoI), a CAD (Computer-Aided Design) program that turns two-dimensional shapes into three-dimensional objects. Sculpt is an organic modeling program in which the students begin with a 3D object and modify it in all sorts of creative ways, as if digitally sculpting a piece of virtual clay.
Step-by-step, they worked their way through the process of designing simple objects such as personalized rings using MoI and Sculpt. Now that every lab workstation is equipped with a Cube 2 printer – thanks to a generous donation from our strategic partner, 3D Systems – it was easy for the students to run test prints so they could quickly evaluate and improve their designs.
“As I began making the images and creating stuff I started to realize that this is a game-changer. It was amazing to me because I never even worked with this type of material before,” said South Carolina Youth ChalleNGe Academy (SCYCA) graduate John Smith. “It helped me realize my passion for art and my talent is there … and I can use it to help other people.”
Once they got a feel for organic modeling, the students took turns making 3D scans of each other and learned how Sculpt fits into the workflow of preparing the files for printing. Then they were able to create full-color mini-busts of themselves using the lab’s recently acquired Z450 powder bed printer.
Evaluating 3D Scanners
Amadou Abakar scans Nate Sydnor with a RealSense-equipped tablet
The students tested and evaluated two kinds of handheld 3D scanning devices: the 3D Systems Sense and an HP tablet with Intel’s RealSense technology.
They experimented with various scanning techniques and lighting conditions, then conducted a focus group with Tom to discuss their findings.
They found the tablet was easier to use than the Sense, which has no onboard monitor and must be connected to a computer by a cumbersome cable. However, they noted that both devices had trouble capturing images of dark-skinned people.
“Scanning can be aggravating when it messes up and you have to redo it, but it’s still really fun,” said SCYCA grad Emilee Bray.
“It’s cool to have a 3D figure of yourself,” she added. “Nobody I know has that kind of stuff!”
3D-printed busts made from scans of Kimora Felton, Nate Sydnor and Emiliee Bray
The group had several ideas for simplifying the workflow and suggested improvements in the RealSense software’s visual feedback to help users hold the tablet at the proper distance from subjects while scanning.
Their feedback is being shared with the leaders of the Sense for Intel RealSense application development team at 3D Systems.
Assembling 3D Printers
The JellyBox, from iMade3D, is a soon-to-be-released 3D printer kit designed specifically for educational use. Its innovative design makes it easy to put together and take apart so it can be used over and over to teach students how a 3D printer works.
The students paired up to do the first independent evaluation of the JellyBox assembly process. Members of the iMade3D team spent a full day in the lab watching them put together four printers.
Josh Nembhard and Kimora Felton assemble a JellyBox 3D printer kit
“It was fun. I mean, we messed up several times, but we still finished in a day,” said SCYCA’s Justin Lewis.
“And for every mistake, we learned from it,” added Amadou Abakar, from DC’s Capital Guardian Youth ChalleNGe Academy (CGYCA).
The students had a finished JellyBox to look at, but were given minimal instructions. At first, they all thought it would be difficult to assemble their kits, but the teams quickly gained confidence as they figured out how to put the pieces together.
Kimora Felton from SCYCA was so wrapped up in the project that when it was time for lunch, she didn’t want to stop working.
Emilee Bray and Osman Bah build a JellyBox
“I really love making stuff,” she explained. “When something really interests me, I go straight for it.”
“I was really impressed and I loved the energy and the attention the students devoted to the project,” said Filip Goc, the JellyBox’s primary designer, noting that their feedback will be invaluable in perfecting the design and refining the assembly instructions before the product goes on the market.
Osman Bah from Maryland’s Freestate ChalleNGe Academy called the experience “amazing.” He said he’d never expected to meet an inventor like Filip and “see how his mind works.”
“The advice he gave me was to just follow the steps and put your mind to it,” Osman recalled.
“A Life-Changing Experience”
A week of immersion training in our lab taught the students some lessons in life, along with advanced 3D skills.
“I learned how to work with people that I don’t know. I usually don’t like doing that,” said Emilee, who teamed up with Osman to build a JellyBox. “It was interesting getting to know someone while working on a project with them.”
The teams show off their JellyBox 3D printers
She discovered that even though they’re from different states and have “a different perspective on everything,” they could put their minds together.
“It did get aggravating at times, but we still worked through it and we still made it,” she said.
“I was proud of us because we worked hard on that thing. We never quit,” added Emilee, who went directly from Lab Week to South Carolina’s Aiken Technical College – the next step in her plan to become a nurse anesthetist.
John, who impressed everyone in the lab with his design talents described our 3D ThinkLink training as “a life-changing experience” that’s given him new skills and tools to help him pursue a career in art.
(l-r) Justin, John, Osman, Nate and Josh compare 3D scanner features
“Being involved in 3D ThinkLink makes me think about the different opportunities I have. Being here gives you a better chance of going somewhere, for example, college or getting a job,” agreed Josh Nembhard, a Freestate grad who plans to study visual design.
Nate Sydnor from CGYCA also said the experience fueled his passion for art by helping him see things in different ways. In addition, he found it rewarding to participate in the scanning and JellyBox research.
“I can look back on this and say I accomplished something great because we are a part of history. We’re making history,” Nate said.
“I’m involved in something that’s going to impact a lot of people in the future. It makes me feel inspired and motivated,” Osman added.
Amadou, who aspires to be an electrical engineer, recalled that on the first day of Lab Week, the students talked about the aphorism that a koi fish grows bigger when it swims in a larger pond.
“This has been a really big pond for us to grow and learn and develop,” he said. “And this is really important because this isn’t something we’re going to leave here. It’s something we can take with us wherever we go.”
As we enter our second decade of serving America’s at-risk youth, we’ve assembled a “greatest hits” video to illustrate how we use 3D printing to help students develop critical thinking and problem solving skills, creativity and confidence.
The YouthQuest Foundation marked its 10th anniversary on October 14 with a Casino Night and Open House to showcase the newly upgraded 3D ThinkLink Lab.
Action in our lobby-turned-casino
The atmosphere was festive as guests played casino games in the lobby of our Chantilly, Virginia, headquarters and enjoyed great food and drinks.
They also got to tour the lab and meet some of the at-risk teens they’re helping by supporting YouthQuest.
Several students from DC’s Capital Guardian Youth ChalleNGe Academy were on hand to show guests what they’re learning in their 3D class.
The 3D ThinkLink Initiative, YouthQuest’s signature STEM education project for at-risk youth, uses 3D design and printing as a vehicle for teaching critical thinking and problem solving skills. We have reached nearly 250 young people since we launched the project three years ago.
3D printers on display in the lab
Thanks to the generosity of our donors and partners, the 3D ThinkLink Lab is now equipped with a collection of 3D printers and design tools that’s unmatched in the Washington area.
We have created a valuable resource for our advanced students who use the lab for weeklong immersion training sessions, as well as for members of the community who want access to our specialized equipment.
YouthQuest was founded by Lynda Mann and Allen Cage. It was certified by the IRS as a tax-exempt 501(c)(3) nonprofit organization in 2005.
We are deeply grateful to all the individuals and organizations that have supported our work through the years and we are excited about doing even more to serve America’s at-risk youth in the years ahead.
