Vocational Orientation is an important part of YouthQuest’s 3D ThinkLink Initiative because our program does much more than introduce students to 3D design and printing.
Our goal is to teach at-risk youth to think differently so they can achieve their potential as successful adults. Their brains grow when they are exposed to new things. The more they experience, the more they have to draw on when thinking creatively about solving problems.
Prototype Productions, Inc., our 2015 3D ThinkLink Strategic Partner, teamed up with Topgolf Loudoun this month to provide a valuable Vocational Orientation experience for our students from Maryland’s Freestate ChalleNGe Academy and the District of Columbia’s Capital Guardian Youth ChalleNGe Academy. PPI Co-Founder and CEO Joe Travez organized the October 15 event which focused on innovation.
Innovation in Practice
As they toured PPI’s headquarters in Ashburn, Virginia, our 3D ThinkLink students discovered that innovative thinking is at the heart of the design, engineering and production work being done there. “Contemplation and action” is how Joe described it to the Cadets.
Chief Technology Officer Ben Feldman explained the ways PPI uses 3D printing, also known as additive manufacturing, along with traditional subtractive manufacturing methods to solve engineering problems.
For example, our students learned how the powered rail system PPI developed for military rifles not only lightens a soldier’s load by as much as 12 pounds by reducing the number of batteries he must carry, but can also be used for sending and receiving potentially lifesaving information on the battlefield.
Another PPI product they saw is a haptic device that mimics a sense of touch for training medical workers to insert IV needles or catheters into patients. Students selected for our advanced immersion training will get to try 3D modeling using haptic devices we recently added to the 3D ThinkLink Lab.
Visiting PPI showed our students some of the ways the technical knowledge and thinking skills they’re learning in class are applied in the working world. It opened their eyes to career paths they might never have considered.
Applied Innovation
From PPI, the group headed to nearby Topgolf Loudoun for a fun, hands-on lesson about innovation in action.
Topgolf puts an imaginative, high-tech spin on the concept of a driving range. The golf balls are embedded with radio frequency identification (RFID) microchips and players try to hit targets in the outfield that are equipped with sensors that read data from the balls. The information is instantly relayed to computers that process the data, tally scores and display the information on players’ monitors.
The three-tiered facility has more than 100 player bays and hundreds of HDTVs, plus big-screen video games and other electronic goodies, all connected to a roomful of computers by miles of cable.
Director of Sales Cassandra Taylor and Facilities Manager Stephen Coffin led a behind-the-scenes tour to explain how everything works. Afterward, the students picked up the clubs and gave it a try. Few of them had ever played golf, but with a little coaching from the Topgolf pros, some of the kids quickly got into the swing of things.
It might have looked like just fun and games, but Topgolf was yet another new experience to stimulate creative thinking.
The Maryland and DC students wrapped up their Vocational Orientation Day by visiting the University of Maryland Tissue Engineering and Biomaterials Lab in College Park to see how researchers are using 3D printing to make medical marvels such as blood vessel grafts and bone replacements.
A week later, 25 Cadets from South Carolina Youth ChalleNGe Academy – our largest 3D ThinkLink class ever – toured 3D Systems in Rock Hill, Duncan-Parnell’s 3D printing division in Charlotte and the University of South Carolina’s Department of Mechanical Engineering in Columbia.
Innovation’s Impact
The young people in ChalleNGe programs used to be turned off to education. For any number of reasons, they dropped out or were kicked out of school. They’ve made a commitment to turn their lives around and we’re helping them turn their brains back on.
Spending a day immersed in innovation can be a profound experience for at-risk children. It inspires them to dream big. It reminds them there’s a wide world of possibilities open to them.
We are grateful to all the companies and schools that provide Vocational Orientation tours for our students. In doing so, they are giving back to the community and investing in tomorrow’s workforce.
Dylan Foster, who plans to be an artist, took full advantage of the new tools in our Lab. With a three-color printer available for the first time, he designed several red, white and blue creations, including a beautifully detailed chess piece. For his robot project, he made a battery holder that’s simpler and works better than the one our Director of Instruction, Tom Meeks, had devised. Our classes also taught him to stay focused on his goals. “I used to give up a whole lot easier,” he said. The South Carolina Youth ChalleNGe Academy graduate, who had never been so far from home before, said he “met a lot of good people” and gained valuable skills during the week in the 3D ThinkLink Lab. “It’s worth the time you put into it,” Dylan said. “You can learn a lot and do a lot.”
“Frustration was a big problem for me,” Kamie Moody admitted. Our 3D ThinkLink classes became her “outlet” from the daily pressures at Freestate ChalleNGe Academy. “Every Monday, when I had 3D, I was excited,” she recalled. Kamie appreciated the chance to learn about CAD (Computer-Aided Design) software because it will help her pursue a career in architecture. Experimenting with Moment of Inspiration’s new features brought out her creative talent. On a small scale, her designs look like jewelry, but on a large scale, they could be futuristic buildings. “The 3D ThinkLink program basically solidified what I already knew; that designing is something that I really want to do,” she said.
Our training might turn out to be a life-changing experience for Caleb Dujmovic. He was one of the top students in his 3D ThinkLink class at Freestate ChalleNGe Academy, where he said he enjoyed learning to make things for his family and friends. His favorite lab project was making a cellphone stand because it incorporated everything he’d learned during the week about Moment of Inspiration’s new features. Caleb applies the problem-solving skills we’ve taught him to his current job in the construction business, but he’s set his sights on a bio-engineering career. It’s something he’d never considered until he visited the 
Nicknamed “Highspeed” by the staff at Capital Guardian ChalleNGe Academy because he was often ahead of his classmates, Christopher Coleman was first exposed to 3D design software in 8th grade. Later, he “really got hooked on 3D” in the Hirshhorn Museum’s ARTLAB+ program. Our 3D ThinkLink classes taught him how to use new design tools and printers he’d never tried before. The self-described “loner” says he also learned to ask for help and work with others. “This program particularly helped me with a lot of my faults – things that I’ve got to improve,” Christopher said. “I learned to be more humble … There’s people that know stuff that I don’t know, and they don’t know things that I know.”
At first, Sherquana Adams didn’t want to sign up for our class at South Carolina Youth ChalleNGe Academy because she thought 3D printing was “for geeks.” But the more she learned about the many ways this technology is being used, the more interested she became. Sherquana, who aspires to be a surgical technician, was amazed by the medical applications for 3D printing. She thought it was “really cool” to put together 3D-printed pieces to make a kid-size prosthetic hand during Lab Week. “I now have a way to express myself,” she said. In just a few months, her opinion of 3D printing has shifted 180 degrees: “This is not for geeks, this is for anybody!”
