Tag: National Guard Youth ChalleNGe Academy

Fall 2016 Scholarship-Winning 3D ThinkLink Student Essays

Blog

These students from the 2016 fall class cycle earned $500 scholarships for these essays about their 3D ThinkLink experience.

By Aunya’ Jones
Freestate ChalleNGe Academy

The YouthQuest 3D printing program has transformed my way of thinking in a variety of ways. Before 3D printing I did not believe in myself, and I had accepted the opinion that I was not good enough. When I initially signed up for 3D printing I did not expect my mindset to change, but thank God it did. Every part of 3D printing took a part in my change specifically speaking, the vocational training. We learned that 3D printing helps make society so much simpler. The employees at Under Armor and students at the University of Maryland help to make other people’s lives better and that inspired me to improve my outlook on life.

Early on in 3D printing, I did not believe that I would be able to make a successful design. Everything seemed so foreign to me. I could barely work the program on the computer. The very first design I made left me feeling shameful. My design on the screen was nothing like what it printed out in reality. Through that experience I learned that I needed to look at the scale of my work. At times, I became frustrated with myself and wanted to give up because my peers’ designs looked better than mine. The disappointment from my first design forced me to make things that I could be proud to show off in my future designs.

I learned to keep my eyes glued to the screen and pay attention to every instruction given by Mr. Meeks. When I had questions I would ask aloud. Every new noun and verb that we learned I tested it on my designs. I was able to use mathematical conversions to figure out what a millimeter looked like off screen and know how it would be once printed.  One day my instructor Mrs. Metzger said that my design was the only successful one to print. It brought me so much joy because that meant that I was finally getting it.

Joining 3D printing has taught me to never give up because you will not be satisfied or get where you are intended to be. Starting something is for a purpose and that purpose is not to quit. 3D printing showed me that I cannot always do things on my own and I have to learn the right way first. Mr. Meeks said, “Mistakes are a part of the process to success,” and that is a quote that I will never forget. I now see the bigger picture to my life’s problems and I’m not afraid to face them. I understand that it was not the destination that mattered but the journey I had to take to make it there. 3D printing did more than teach me how to use a program. 3D printing has helped guide me into making better decisions and gave me a new life skill along the way. It has really helped me understand my self-worth because now I know I can design my own future.

_________________________________________

By Brock Jasmann
Freestate ChalleNGe Academy

3D printing has been a very awe-inspiring experience to me. I have personally benefited from 3D printing by learning that I can make something complex and visually outstanding by using a couple different tools on Moment of Inspiration. I use the Moment of Inspiration program to make my creative designs, but to me it’s more than just a computer program. I say this because, through the service to the community project, I was given the opportunity to go to a library to teach the community about 3D printing.

It was an amazing experience to see how interested and impressed the kids and adults were at the library when we showed them how to make 3D prints. We printed things such as: books, key chains, arrayed stars with faces, and little Lego shaped men. I taught them about how we use additive manufacturing, which is “a process of making three dimensional solid objects from a digital model[1]”. The impact that 3D printing has not only on me but the community is enormous, fun, and educational.

While visiting employees at Bustin Boards, Under Armor Light House, and The Foundery in Baltimore, Maryland during our Vocational Orientation, I learned how they used 3D printing in their skateboards, clothing, and shoes. For example, Under Armor takes virtual images from athletes’ bodies to make custom clothing to fit their body type based off of the 3D scan. This showed me that 3D printing was for more than just creating small items, it is used in technology to make clothing and everyday items.

“While 3D printing has been successfully used in the health care sector to make prosthetic limbs, custom hearing aids and dental fixtures, the technology is now being used to create more complex structures — particularly human tissue”-Cadie Thompson.[2] Another phenomenal production of 3D printing is that scientists at University of Maryland are making fake working environments for cells to thrive in to replace burnt flesh and scars with a foreign body fat. The fat is then used to fit the affected area. The scientist surgically place the healthy host cells on the body to make the scar completely disappear. This effect of 3D printing is revolutionary because now wounded warriors will have a normal life by no longer having scars exposed and they can have realistic looking prosthetic limbs.

I am ecstatic to know that I can make anything if I put my mind to it. Moment of Inspiration has inspired me to learn more about 3D printing and helped me to teach it to my community. 3D printing is important to me because now I can express myself in a form of art that I’m talented in. Also, I am more able to educate my community through my new learned skill in 3D printing. In conclusion, all of these examples are reasons why 3D printing is awe-inspiring to me.

[1] http://3dprinting.com/what-is-3d-printing/

[2] http://www.cnbc.com/id/49348354: Quote cited from CNBC “How 3D Printing is Reshaping Medicine”.

Vocational Orientation Opens Young Eyes to Opportunities

News
Students look at a 3D printed architectural model at 3D Systems in Rock Hill, SC, during 3D ThinkLink Vocational Orientation October 20, 2016

Introducing at-risk youth to 3D design and printing is only one part of YouthQuest’s 3D ThinkLink Initiative. Our larger purpose is to help troubled teens learn to think in new ways and dream big.

One way we do that is through Vocational Orientation events, which are a requirement for completion of the 3D ThinkLink training we provide for National Guard Youth ChalleNGe Programs in South Carolina, Maryland and Washington, DC. Students spend a day touring businesses and universities to see real-world applications for the concepts they’re learning about in class.

During an October 13 Vocational Orientation event, University of Maryland grad student Max Lerner tells 3D ThinkLink students from Maryland and DC about the 3D printers he uses in the Biomaterials and Tissue Engineering Lab.
3D printers in the University of Maryland Biomaterials and Tissue Engineering Lab

Many of the kids we serve have struggled with academics and their life experience is severely limited. Before they enrolled in a ChalleNGe Academy, few imagined themselves pursuing higher education or a career in a STEAM (Science, Technology, Engineering, Art, Math)-related field.

That’s why being in a college lab or a high-tech manufacturing facility for the first time can be a life-changing moment for these at-risk teens. In essays they write about how our 3D ThinkLink training affected their lives, students frequently mention being inspired by something they saw during Vocational Orientation.

In October, our Maryland and DC students enjoyed a full day of eye-opening experiences, starting with a visit to the newly opened City Garage in South Baltimore. The former bus garage has been transformed into a wonderland of innovation, anchored by Under Armour’s Lighthouse, a 35,000-square-foot design and manufacturing center. The UA Lighthouse includes a room equipped with more than 50 cameras for 3D scanning of athletes. Designers use the scans to create individually tailored sportswear. The students also learned that UA uses 3D design and printing to prototype footwear and apparel.

Josh Dunn of Bustin Boards tells 3D ThinkLink students from Maryland and DC how the company designs and builds skateboards during a Vocational Orientation tour in Baltimore on October 13, 2016.
Josh Dunn explains how Bustin Boards makes skateboards

Elsewhere in the City Garage complex, the kids had fun at the Bustin Boards skateboard company. Along with trying out the boards, they discovered that the Moment of Inspiration software they’re learning to use in class is the same type of CAD (Computer Aided Design) program the company’s designers use. That led to a discussion about how CAD skills are needed for both 3D printing, or “additive manufacturing,” in which machines build objects by putting material only where it is needed, and traditional “subtractive manufacturing,” in which machines cut away material to form objects.

All kinds of additive and subtractive manufacturing devices were on display next door at The Foundery, a large makerspace. In the midst of all that modern technology, the kids also got some hands-on experience with one of the oldest manufacturing methods – blacksmithing. After heating, pounding and bending red-hot steel, the kids surely gained an appreciation for 3D software that can turn a simple shape into something useful or decorative with just a few clicks of a mouse.

3D ThinkLink students from South Carolina Youth ChalleNGe Academy examine a 3D printed object during a Vocational Orientation visit at Duncan-Parnell's 3D printing shop in Charlotte on October 20, 2016.
Students visit Duncan-Parnell’s 3D printing shop in Charlotte

Students from South Carolina Youth ChalleNGe Academy also saw additive and subtractive manufacturing processes in action as they visited Duncan-Parnell’s 3D printing department in Charlotte, NC, 3D Systems headquarters in Rock Hill, SC and the University of South Carolina Department of Mechanical Engineering in Columbia.

The medical uses for 3D printing often strike a chord with our 3D ThinkLink students.

The kids from Maryland’s Freestate and DC’s Capital Guardian Youth ChalleNGe Academies were fascinated to see how 3D printing is used to develop things like bone and vascular replacements in the University of Maryland’s Biomaterials and Tissue Engineering Lab.

South Carolina Youth ChalleNGe Academy Cadets look at a display on 3D printing in medicine during Vocational Orientation tour of 3D Systems in Rock Hill, SC, October 20, 2016.
Medical technology display at 3D Systems

At 3D Systems, the South Carolina students learned about the company’s work in the fast-growing specialty of pre-surgery modeling. A 3D Systems team recently worked with doctors at Children’s Hospital at Montefiore in New York who separated baby brothers joined at the head. They were able to plan and practice every step of the complex surgery thanks to precise 3D-printed models made from MRIs and CT scans of the boys’ skulls.

We often remind students that being exposed to new ideas and experiences literally makes their brains grow, as new connections between neurons are formed. Our field trips also open students’ minds and expand their view of what’s possible. Vocational Orientation events make these at-risk teens aware of opportunities they had never imagined. While they may not end up working on the cutting edge of technology, the thinking skills and confidence they develop during their 3D ThinkLink experience will help them make the most of any opportunity they choose to pursue.

[Show picture list]

Scholarship Winners Want to Use 3D Printing to Help Others

News
YouthQuest Co-Founder and President Lynda Mann presents scholarships to 3D ThinkLink essay contest winners Trevon Ahl and Alycia Freeman at South Carolina Youth ChalleNGE Academy

The YouthQuest Foundation has awarded scholarships to two South Carolina Youth ChalleNGe Academy graduates for their essays about how 3D ThinkLink training affected them.

Trevon Ahl and Alycia Freeman, both 17, are among the 16 students who completed the latest cycle of the 3D design and printing course YouthQuest provides at the school for at-risk teens in Eastover, South Carolina.

YouthQuest Co-Founder and President Lynda Mann presented the $500 awards to the essay competition winners during SCYCA’s graduation ceremony on June 8.

Bestselling author John Gilstrap, whose latest novel in the Jonathan Grave thriller series is Friendly Fire, has judged the semi-annual contest since 2014.

“This year’s batch of essays featured two standouts for me, both because they focused not on what the writer got from their introduction to 3D printing, but rather on how they will put their knowledge to work for others,” he said.

3D ThinkLink students from SCYCA attend Vocational Orientation at 3D Systems in Rock Hill, South Carolina on April 21, 2016
SCYCA students at 3D Systems for Vocational Orientation

In his essay, Trevon described the excitement he felt the first time he used Moment of Inspiration design software to transform a flat shape into a 3D digital model that he could print.

He also recalled the Vocational Orientation trip his class took to 3D Systems headquarters in Rock Hill, South Carolina, where he saw high-end printers that go far beyond the simple plastic-extrusion machines he learned to use in class. These professional 3D printers make objects from a variety of materials, including rubber, ceramics and metals.

“When I saw that, I was overall enthusiastic about this new wave of how to use machinery in everyday life that will help others in different ways,” Trevon wrote.

“If I had a 3D titanium printer for my personal use I would make bikes for all the children in my neighborhood,” he added “I’ve seen many kids in my community that walk everywhere and they would be grateful for a bike. I would even have them customize their own bicycle frame and then I`d print it out for them.”

Because he loves to fish, Trevon also said he wanted to 3D print a titanium fishing rod and “catch so many fish I would be able to share with the people in my community so we would all be able to enjoy a good fish fry.”

The $500 scholarship will help Trevon achieve his post-ChalleNGe goal of attending a technical college to earn a welding certificate. His fellow winner Alycia plans to study surgical technology at Savannah Technical College.

South Carolina Youth ChalleNGE Academy 3D ThinkLink students Hailey Key, Asia Grant and Alycia Freeman examine 3D printed objects during Vocational Orientation at 3D Systems in Rock Hill, South Carolina on April 21, 2016
Hailey Key, Asia Grant and Alycia Freeman examine 3D printed objects during Vocational Orientation

“Alycia’s story was quite touching,” John Gilstrap said.

Her dad was doing drugs and her parents divorced when she was 13. She moved five times and skipped school often, spending most days caring for her ailing grandmother instead of going to class.

“I then started to follow in my father’s footsteps,” Alycia wrote. “About a year later, I knew I had to be successful. I didn’t want to be a product of my environment.”

That’s when she decided to enroll in SCYCA. Being in the 3D ThinkLink class helped Alycia get re-engaged in education.

Like Trevon, Alycia said the visit to 3D Systems showed her how she can use the technology she learned about in class for the benefit of others. She was inspired to see the many ways 3D printing is used in health care.

“Being that I took care of my grandmother, I want to help others live a better life in every way possible,” she explained. “3D printing encouraged me to become a surgical nurse. … I’m now motivated and determined to go to school and get into the medical field and actually complete it!”

CLICK HERE to read the complete essays

Spring 2016 Scholarship-Winning 3D ThinkLink Student Essays

Blog

These students from the 2016 fall class cycle earned $500 scholarships for these essays about their 3D ThinkLink experience.

By Trevon Ahl
South Carolina Youth ChalleNGe Academy

When I entered into the room with the other cadets for class and was seated we were then shown several hands-on videos that we followed along with our individual laptops. Secondly, we learned how to extrude a 3-dimensional object. Extrude means when you have an object that is flat on the plane (Moment of Inspiration). You can extrude the object and basically make it stand up. Just the sight of seeing a shape that was flat, then it stood up made me feel excited! I didn’t think that was going to happen when I began the lesson.

3D printing is important to me in many ways. If you love dogs like I do you can make multiple items for your dogs, such as dog tags, prosthetic legs, prosthetic tails, prosthetic ears, etc. Also, you can make varieties of telephone cases for the different types of phones that are out there.

When Mr. Johnson and Tom Meeks said to us as a class that ‘’3D printing is about turning 2D objects to 3D objects and printing them to a real life situation that can be useful to many people and/or different industries.’’ When our 3D printing class visited 3D Systems in Rock Hill, S.C. we learned that there are many different types of 3D printers. Some 3D printers print in porcelain, titanium, powder and plastic. Yes, I know what you are thinking: powder? The machine hardens the powder; then when you make your shape or objects it dips your shape into the super glue and become hardened into the shape that you are making.

3D is the new type of manufacturing. They even made a car frame that looked like a Lamborghini. The New Balance shoe company now has a pair of tennis shoes that the soles of them are made with 3D printing technology. When I saw that I was overall enthusiastic about this new wave of how to use machinery in everyday life that will help others in different ways!

If I had a 3D titanium printer for my personal use I would make bikes for all the children in my neighborhood. I’ve seen many kids in my community that walk everywhere and they would be grateful for a bike.  I would even have them customize their own bicycle frame and then I`d print it out for them.

I would love to also make a titanium fishing rod because I love to fish. Once I catch so many fish I would be able to share with the people in my community so we would all be able to enjoy a good fish fry.

_________________________________________

By Alycia Freeman
South Carolina Youth ChalleNGe Academy

I’m Cadet Freeman from Beaufort, South Carolina. I grew up on St. Helena Island. My parents got divorced when I was 13 years old because my father was more interested in drugs than he was into having a relationship with my mother.

I got pulled out of school a lot and moved about 5 times. My grades started to plummet and I was told I wouldn’t be able to obtain my high school diploma. This was due to all the days that I had missed.

I began taking care of my grandmother who got sick and she had to have a knee replacement. My grandmother started back walking after surgery but still needed assistance. She passed away a couple months later due to other complications. I was still in school at the time but I only went about twice a week.

I then started to follow in my father’s footsteps. I no longer wanted to be around people. About a year later I knew I had to be successful. I didn’t want to be a product of my environment. I heard about SCYCA through a family member. I asked my mother did she think it was a good way to try and get my G.E.D. Her response was, “Absolutely!” She was very surprised and proud of my decision.

My way of thinking and mindset made a 360 degree turn while attending the program for these five months. I’m now motivated and determined to go to school and get into the medical field and actually complete it!

My favorite part that I thought was most interesting and cool was applying 3D technology to the field that I want to take up at Savannah Tech. I learned many things about 3D printing that I was not aware of. I found it interesting that tests on mice with 3D printed objects showed that there were no signs of cells dying in their tissues. I also learned at 3D Systems people who do additive manufacturing print organs, stem cells, bones and even surgical tools. I feel like every disabled person deserves to enjoy a normal life.

Being that I took care of my grandmother, I want to help others live a better life in every way possible. 3D printing encouraged me to become a surgical nurse. When I become a surgical nurse I will then be able to insert/place replacement bones, organs, etc. in different areas of the human body.

I also want to take my career further so that I can be an additive manufacturer. Not to mention other things I could create such as shoe soles, car parts, skeletal parts, foods, and models with different types and sizes of 3D printers. 3D printing will become even more popular in the future and I would like to advance my experience.

Students Explore 3D Printing Beyond the Classroom

News
3D ThinkLink students from DC's Capital Guardian Youth ChalleNGe Academy visit the University of Maryland's Tissue Engineering Lab during Vocational Orientation in April 2016

Vocational Orientation is an important part of YouthQuest’s 3D ThinkLink training because it shows students some of the ways they can use the skills they’re learning in class.

In April, 3D ThinkLink students from Maryland’s Freestate, the District of Columbia’s Capital Guardian and South Carolina Youth ChalleNGe Academies visited businesses and universities to:

  • Deepen their understanding of 3D printing technology;
  • Learn about career opportunities in related fields;
  • Meet people who use 3D design and printing in their occupations;
  • See teamwork, creative thinking and problem solving in action.

At the Rock Hill, S.C., headquarters of our 3D ThinkLink Strategic Partner, 3D Systems, the South Carolina cadets learned about 3D printing’s explosive growth in areas ranging from medicine, automotive and aerospace engineering to fashion and entertainment. Director of Corporate Communications Tim Miller led a tour showing the full line of 3D Systems products and explaining the special applications for each machine. The students, who have only simple, desktop plastic-extrusion 3D printers in their classrooms, were amazed by the variety of printing methods and materials available.

Duncan-Parnell's Camren Summerlin shows students a 3D-printer
Duncan-Parnell’s Camren Summerlin shows students a 3D printer

The SCYCA students began their Vocational Orientation Day with a visit to a business that uses many 3D Systems products in its work with civil engineering clients, Duncan-Parnell in Charlotte, N.C. The staff showed them some of the latest 3D printers and talked about jobs available for operators who have the skills to produce high-quality 3D models. Applications Engineer Camren Summerlin also encouraged the students to consider repairing and maintaining 3D printers as a career.

The day wrapped up in Columbia with a tour of the University of South Carolina’s Department of Mechanical Engineering. Graduate Director Dr. David Rocheleau explained how mechanical engineers “make things and break things” – analyzing the strengths and weakness of materials in research to create better, safer products. In addition to 3D printers, the students saw engineering tools such as a wind tunnel, a century-old milling machine and a huge device that can cut through practically anything using a high-pressure stream of water.

UMD grad student Bao Nguyen explains how this 3D-printed scaffold is used to create a hip bone replacement.
UMD grad student Bao Nguyen explains how this 3D-printed scaffold is used to create a hip bone replacement.

The Maryland and DC students learned about 3D printing’s role in a very different kind of engineering during their visit to the University of Maryland in College Park. They met Laurie Bracaglia, Charlotte Piard, Bao Nguyen and other graduate students in the Tissue Engineering and Biomaterials Lab who are developing innovations such as human bone replacements. The researchers use 3D printing to build delicate forms around which bone cells will grow. The cadets took part in hands-on demonstrations of an emerging technology that would have seemed like science fiction not so long ago.

Our students also discovered how 3D printing fits into the invention process when they  toured Prototype Productions, Inc., in Ashburn, VA, another 3D ThinkLink Strategic Partner. Chief Operating Officer Italo Travez and his staff explained that everyone at PPI – designers, engineers and machine operators – share ideas and work together to find innovative solutions to customers’ needs.

During Vocational Orientation for 3D ThinkLink students from Maryland and DC in April 2016, Prototype Productions COO Italo Travez demonstrates products PPI developed
PPI’s Italo Travez demonstrates some of the products his company developed

Mr. Travez, who emigrated from Ecuador with his family when he was a child, also shared personal stories about what drove him to become a mechanical engineer and how he and his brother, Joe, built their small family business into a state-of-the-art prototyping operation that has developed hundreds of products.

There was even a side-order of innovation during a lunch break at Topgolf Loudoun in Ashburn. Director of Sales Cassandra Taylor led a tour of the facility that puts a high-tech spin on the traditional driving range. Players hit golf balls embedded with RFID (radio frequency identification) chips into targets equipped with sensors that read the chips and send the scoring data back to the players. Although most of the cadets had never touched a golf club, they had fun giving Topgolf a try.

The at-risk teens in our 3D ThinkLink classes typically have a narrow view of the world and their place in it. Many have never been to a high-tech workshop or a major university campus. These Vocational Orientation events help open students’ eyes to what’s possible for them as they plan their next steps into adulthood.

[Show picture list]

2015 Scholarship-Winning 3D ThinkLink Student Essays

Blog

These three students from the 2015 fall-winter class cycle earned $500 scholarships for these essays about their 3D ThinkLink experience.

_________________________________________

By Kathaleen Polanco
South Carolina Youth ChalleNGe Academy

My name is Kathaleen Polanco Aponte Bejarano and I’m from Beaufort County. I was born in Hilton Head Island, but I live in Bluffton. I was chosen by Mr. Johnson to be in the 3D printing class, which by the way, I’m so excited to be in. I find it amazing that I and nine other girls are in 3D printing out of the entire nineteen cadets available. To me 3-D printing is a way to escape real life. It’s a way where I can be in my own little place, a place where I can design any and everything. It’s new way to release my anger.

I find that being in 3D printing gives me another opportunity in life, actually this whole program gives me another opportunity in life. I want to surround myself with positive things and positive people. I’m so happy my parents sent me to this program, Of course I didn’t want to go to South Carolina Youth ChalleNGe Academy but after the first day I realized it was my last chance to make my parents and myself proud. I’m sick of breaking my parents’ heart. I needed a change in the life I was living. I see a change in me that no one in my family thought could happen.

I can proudly say I’m proud of myself for participating in 3D printing I would love to make things for my sister and my parents even for my future babies. I’m going to be very honest, after this program I wasn’t sure of what I was going to do with my life. That’s exactly why I’ve decided to join Aiken Tech College and study Computer Networking where I can further my education and hopefully further my skills with a 3D printer.

It was so good to meet Tom. He gave me the idea to further my education. I wasn’t sure if I was going to complete this program with my GED. When I asked Tom if I could make it out on the real world and survive without my GED, he told me anything is possible, it would just be little harder without any higher education. Tom inspired me to be a better me and never give up no matter how hard life gets. ‘’Fall seven get up eight.’’

“You have brains in your head. You have feet in your shoes. You can steer yourself any direction you choose. You’re on your own. And you know what you know. And YOU are the one who’ll decide where to go…”

― Dr. Seuss, Oh, The Places You’ll Go!

This quote to me means that you can decide where you end up in life and that you have the brains and you have the power and you can walk the steps necessary to be successful in life…..YOU!

_________________________________________

By Kimora Felton
South Carolina Youth ChalleNGe Academy

My name is Kimora Felton. I’m 16 years old and from Myrtle Beach SC. I’m a cadet from the South Carolina Youth ChalleNGe Academy.

Before getting involved with 3D printing my mind was scattered. Trying to relieve anger and finding ways to express myself, I’d do things that made me act out of character, which led me to think I wasn’t worth anything at all. Finding myself as a student of Youth Quest Foundation Program made me think of myself as someone. I finally found a way to express myself through creating digital objects and turning them all into 3 dimensional physical models.

First, I got a mental image of the idea. Secondly, I transferred my mental image onto the computer. Finally, I printed the object out using the Cube 3 3D printing machine.

I decided that I would involve 3D Printing into my future career. I plan to major in Animal Science at Coastal Carolina University which will authorize me to be veterinarian. Involving 3D printing into this field will give deformed, damaged or diseased animals that are on the verge of being euthanized a second chance. “All creatures are deserving of a life free from fear and pain.”- Maura Cummings

3D printing will allow me to create prosthetic limbs and implants for injured animals, which will make life trouble-free and unchallenging. By scanning a healthy animal just like the injured one, I can generate the body part to be molded and printed. As the animal grows, the implant or amputee will have to be changed out and made again. The materials used in 3D printing can not only copy the function of the missing part, but also combine with the structure of the animal. For every animal that would have put down, 3D printing has brought far more than a million reasons to continuing life for such animals.

I feel that I deserve this immersion scholarship because I’ve shown a mass amount of interpersonal communication skills, hard-work ethic and creativity.

_________________________________________

By Emilee Bray
South Carolina Youth ChalleNGe Academy

My name is Emilee Bray, I was born on April 24th 1998, and this makes me 17 years of age. I am currently a cadet at South Carolina Youth ChalleNGe Academy, my reason for attending this academy is to acquire my GED.

I have been offered many opportunities including 3D printing. The 3D printer was founded by Charles W. Hull in the mid-1980s. 3D printers use a process called “stereolithography” which uses UV lasers to strengthen photopolymer that creates 3D parts by layers.

I plan on enrolling in Aiken Technical College in January 2016 to study Health Care; health care is a constant topic in society today. Now, with the fast paced development of additive inventions,  the increasingly popular technologies often referred to as 3D printers, the future of health care is proceeding in ways both acquainted and dramatically new. 3D printing is making a significant impact on health care patients, whether it’s a cast or a brace. Medical professionals are rising in discovering this printing device because it shortens costs and improves healthcare patients.

3D printing has impacted my life in a number of ways. On October 22nd, 2015 my 3D printing class and I went to 3D Systems and two other 3D printing centers. I learned a variety of interesting facts, one of them being this device can print food, human body parts, and other fun and exciting objects such as iPhone cases and any device stand to prop your gadget. You can also 3D print different materials like glass, gold, platinum, silver, titanium and other steels, etc. If I were to break any type of bone in my body, I could 3D print a cast or splint for myself that would make a big impact in my life.

John F. Kennedy once said: “Efforts and courage are not enough without purpose and direction”, meaning if you don’t make an effort or have enough courage to do what you want to do in life than you won’t succeed or have a purpose in whatever you want to do. With that being said, when I become an assistant in the medical field I will have courage and make an effort to change somebody’s life all thanks to 3D printing.

Students Do Real Research in YouthQuest’s 3D ThinkLink Lab

News
Advanced 3D ThinkLink students assemble JellyBox 3D printer kits during immersion lab week in January 2016

Eight young people who spent a week in our 3D ThinkLink Creativity Lab this month learned new skills and took part in hands-on research that will benefit other 3D printing enthusiasts.

“Not only did our students broaden their 3D design and printing experience by exploring the complexities of full-color 3D printing workflows, they provided valuable early feedback for the developers and manufacturers of two new 3D technologies,” said YouthQuest Director of Instruction Tom Meeks.

Capital Guardian Youth ChalleNGe Academy graduate Amadou Abakar watches his 3D design take shape on a Cube 2 printer during January 2016 immersion week in YouthQuest's 3D ThinkLink Creativity Lab
Amadou Abakar watches his 3D design take shape on a Cube 2 printer

They were selected for Lab Week because of their outstanding performance in the latest cycle of 3D ThinkLink classes at National Guard Youth ChalleNGe Academies serving South Carolina, Maryland and the District of Columbia. YouthQuest provides the equipment, curriculum and training for the residential academies to help at-risk teens develop critical thinking and problem solving skills through 3D design and printing.

It was the largest group so far to receive 40 hours of advanced training in our Chantilly, Virginia, facility. Unlike the typical maker space, the 3D ThinkLink Creativity Lab is dedicated solely to 3D design, scanning and printing. It is a true laboratory environment designed to promote comparative analysis and develop creative solutions.

The students were the first to experience the lab’s new 3D scanning and printing capabilities, and the first to assemble a unique 3D printer kit.

Going With the Workflow

The week began with an introduction to Cubify Sculpt, a type of 3D design software the students had never tried.

South Carolina Youth ChalleNGe Academy graduate John Smith uses Cubify Sculpt to design a monster's head printer during January 2016 immersion week in YouthQuest's 3D ThinkLink Creativity Lab
John Smith uses Cubify Sculpt to design the head for a monster figurine

In their classes at school, they used Moment of Inspiration (MoI), a CAD (Computer-Aided Design) program that turns two-dimensional shapes into three-dimensional objects. Sculpt is an organic modeling program in which the students begin with a 3D object and modify it in all sorts of creative ways, as if digitally sculpting a piece of virtual clay.

Step-by-step, they worked their way through the process of designing simple objects such as personalized rings using MoI and Sculpt. Now that every lab workstation is equipped with a Cube 2 printer – thanks to a generous donation from our strategic partner, 3D Systems – it was easy for the students to run test prints so they could quickly evaluate and improve their designs.

“As I began making the images and creating stuff I started to realize that this is a game-changer. It was amazing to me because I never even worked with this type of material before,” said South Carolina Youth ChalleNGe Academy (SCYCA) graduate John Smith. “It helped me realize my passion for art and my talent is there … and I can use it to help other people.”

Once they got a feel for organic modeling, the students took turns making 3D scans of each other and learned how Sculpt fits into the workflow of preparing the files for printing. Then they were able to create full-color mini-busts of themselves using the lab’s recently acquired Z450 powder bed printer.

Evaluating 3D Scanners

Amadou Abakar scans Nate Sydnor while the Capital Guardian Youth ChalleNGe Academy graduates evaluate 3D scanners during January 2016 immersion week in YouthQuest's 3D ThinkLink Creativity Lab
Amadou Abakar scans Nate Sydnor with a RealSense-equipped tablet

The students tested and evaluated two kinds of handheld 3D scanning devices: the 3D Systems Sense and an HP tablet with Intel’s RealSense technology.

They experimented with various scanning techniques and lighting conditions, then conducted a focus group with Tom to discuss their findings.

They found the tablet was easier to use than the Sense, which has no onboard monitor and must be connected to a computer by a cumbersome cable. However, they noted that both devices had trouble capturing images of dark-skinned people.

“Scanning can be aggravating when it messes up and you have to redo it, but it’s still really fun,” said SCYCA grad Emilee Bray.

“It’s cool to have a 3D figure of yourself,” she added. “Nobody I know has that kind of stuff!”

Full-color mini-busts made from 3D scans of Kimora Felton, Nate Sydnor and Emiliee Bray during January 2016 immersion week in YouthQuest's 3D ThinkLink Creativity Lab
3D-printed busts made from scans of Kimora Felton, Nate Sydnor and Emiliee Bray

The group had several ideas for simplifying the workflow and suggested improvements in the RealSense software’s visual feedback to help users hold the tablet at the proper distance from subjects while scanning.

Their feedback is being shared with the leaders of the Sense for Intel RealSense application development team at 3D Systems.

Assembling 3D Printers

The JellyBox, from iMade3D, is a soon-to-be-released 3D printer kit designed specifically for educational use. Its innovative design makes it easy to put together and take apart so it can be used over and over to teach students how a 3D printer works.

The students paired up to do the first independent evaluation of the JellyBox assembly process. Members of the iMade3D team spent a full day in the lab watching them put together four printers.

South Carolina Youth ChalleNGe Academy graduate Kimora Felton and and Freestate ChalleNGe Academy graduate Josh Nembhard build a JellyBox 3D printer during January 2016 immersion week in YouthQuest's 3D ThinkLink Creativity Lab
Josh Nembhard and Kimora Felton assemble a JellyBox 3D printer kit

“It was fun. I mean, we messed up several times, but we still finished in a day,” said SCYCA’s Justin Lewis.

“And for every mistake, we learned from it,” added Amadou Abakar, from DC’s Capital Guardian Youth ChalleNGe Academy (CGYCA).

The students had a finished JellyBox to look at, but were given minimal instructions. At first, they all thought it would be difficult to assemble their kits, but the teams quickly gained confidence as they figured out how to put the pieces together.

Kimora Felton from SCYCA was so wrapped up in the project that when it was time for lunch, she didn’t want to stop working.

South Carolina Youth ChalleNGe Academy graduate Emilee Bray and and Freestate ChalleNGe Academy graduate Osman Bah build a JellyBox 3D printer during January 2016 immersion week in YouthQuest's 3D ThinkLink Creativity Lab
Emilee Bray and Osman Bah build a JellyBox

“I really love making stuff,” she explained. “When something really interests me, I go straight for it.”

“I was really impressed and I loved the energy and the attention the students devoted to the project,” said Filip Goc, the JellyBox’s primary designer, noting that their feedback will be invaluable in perfecting the design and refining the assembly instructions before the product goes on the market.

Osman Bah from Maryland’s Freestate ChalleNGe Academy called the experience “amazing.” He said he’d never expected to meet an inventor like Filip and “see how his mind works.”

“The advice he gave me was to just follow the steps and put your mind to it,” Osman recalled.

“A Life-Changing Experience”

A week of immersion training in our lab taught the students some lessons in life, along with advanced 3D skills.

“I learned how to work with people that I don’t know. I usually don’t like doing that,” said Emilee, who teamed up with Osman to build a JellyBox. “It was interesting getting to know someone while working on a project with them.”

The teams show the JellyBox 3D printers they built during January 2016 immersion week in YouthQuest's 3D ThinkLink Creativity Lab
The teams show off their JellyBox 3D printers

She discovered that even though they’re from different states and have “a different perspective on everything,” they could put their minds together.

“It did get aggravating at times, but we still worked through it and we still made it,” she said.

“I was proud of us because we worked hard on that thing. We never quit,” added Emilee, who went directly from Lab Week to South Carolina’s Aiken Technical College – the next step in her plan to become a nurse anesthetist.

John, who impressed everyone in the lab with his design talents described our 3D ThinkLink training as “a life-changing experience” that’s given him new skills and tools to help him pursue a career in art.

Justin Lewis, John Smith, Osman Bah, Nate Sydnor and Josh Nembhard compare 3D scanner features during January 2016 immersion week in YouthQuest's 3D ThinkLink Creativity Lab
(l-r) Justin, John, Osman, Nate and Josh compare 3D scanner features

“Being involved in 3D ThinkLink makes me think about the different opportunities I have. Being here gives you a better chance of going somewhere, for example, college or getting a job,” agreed Josh Nembhard, a Freestate grad who plans to study visual design.

Nate Sydnor from CGYCA also said the experience fueled his passion for art by helping him see things in different ways. In addition, he found it rewarding to participate in the scanning and JellyBox research.

“I can look back on this and say I accomplished something great because we are a part of history. We’re making history,” Nate said.

“I’m involved in something that’s going to impact a lot of people in the future. It makes me feel inspired and motivated,” Osman added.

Amadou, who aspires to be an electrical engineer, recalled that on the first day of Lab Week, the students talked about the aphorism that a koi fish grows bigger when it swims in a larger pond.

“This has been a really big pond for us to grow and learn and develop,” he said. “And this is really important because this isn’t something we’re going to leave here. It’s something we can take with us wherever we go.”

CLICK BELOW TO SEE PHOTO GALLERY

[Show picture list]

3DThinkLink Students Explore Innovation in Action

News
Prototype Productions Inc. Co-Founder and CEO Joe Travez with 3DThinkLink students from Capital Guardian Youth ChalleNGe Academy during Vocational Orientation October 15, 2015

Vocational Orientation is an important part of YouthQuest’s 3D ThinkLink Initiative because our program does much more than introduce students to 3D design and printing.

Our goal is to teach at-risk youth to think differently so they can achieve their potential as successful adults. Their brains grow when they are exposed to new things. The more they experience, the more they have to draw on when thinking creatively about solving problems.

Prototype Productions, Inc., our 2015 3D ThinkLink Strategic Partner, teamed up with Topgolf Loudoun this month to provide a valuable Vocational Orientation experience for our students from Maryland’s Freestate ChalleNGe Academy and the District of Columbia’s Capital Guardian Youth ChalleNGe Academy. PPI Co-Founder and CEO Joe Travez organized the October 15 event which focused on innovation.

Innovation in Practice

3DThinkLink students examine 3D-printed objects at Prototype Productions, Inc. during Vocational Orientation
Students examine 3D-printed objects at PPI

As they toured PPI’s headquarters in Ashburn, Virginia, our 3D ThinkLink students discovered that innovative thinking is at the heart of the design, engineering and production work being done there. “Contemplation and action” is how Joe described it to the Cadets.

Chief Technology Officer Ben Feldman explained the ways PPI uses 3D printing, also known as additive manufacturing, along with traditional subtractive manufacturing methods to solve engineering problems.

For example, our students learned how the powered rail system PPI developed for military rifles not only lightens a soldier’s load by as much as 12 pounds by reducing the number of batteries he must carry, but can also be used for sending and receiving potentially lifesaving information on the battlefield.

Another PPI product they saw is a haptic device that mimics a sense of touch for training medical workers to insert IV needles or catheters into patients. Students selected for our advanced immersion training will get to try 3D modeling using haptic devices we recently added to the 3D ThinkLink Lab.

Visiting PPI showed our students some of the ways the technical knowledge and thinking skills they’re learning in class are applied in the working world. It opened their eyes to career paths they might never have considered.

Applied Innovation

From PPI, the group headed to nearby Topgolf Loudoun for a fun, hands-on lesson about innovation in action.

Topgolf Loudoun Facilities Manager Stephen Coffin explains how RFID chip-embedded golf balls are scanned and sorted
Facilities Manager Stephen Coffin explains the innovative technology behind Topgolf

Topgolf puts an imaginative, high-tech spin on the concept of a driving range. The golf balls are embedded with radio frequency identification (RFID) microchips and players try to hit targets in the outfield that are equipped with sensors that read data from the balls. The information is instantly relayed to computers that process the data, tally scores and display the information on players’ monitors.

The three-tiered facility has more than 100 player bays and hundreds of HDTVs, plus big-screen video games and other electronic goodies, all connected to a roomful of computers by miles of cable.

Director of Sales Cassandra Taylor and Facilities Manager Stephen Coffin led a behind-the-scenes tour to explain how everything works. Afterward, the students picked up the clubs and gave it a try. Few of them had ever played golf, but with a little coaching from the Topgolf pros, some of the kids quickly got into the swing of things.

A Capital Guardian ChalleNGe Academy Cadet hits a drive at Topgolf Loudoun during 3D ThinkLink class Vocational Orientation
A student experiences a high-tech twist on golf

It might have looked like just fun and games, but Topgolf was yet another new experience to stimulate creative thinking.

The Maryland and DC students wrapped up their Vocational Orientation Day by visiting the University of Maryland Tissue Engineering and Biomaterials Lab in College Park to see how researchers are using 3D printing to make medical marvels such as blood vessel grafts and bone replacements.

A week later, 25 Cadets from South Carolina Youth ChalleNGe Academy – our largest 3D ThinkLink class ever – toured 3D Systems in Rock Hill, Duncan-Parnell’s 3D printing division in Charlotte and the University of South Carolina’s Department of Mechanical Engineering in Columbia.

Innovation’s Impact

The young people in ChalleNGe programs used to be turned off to education. For any number of reasons, they dropped out or were kicked out of school. They’ve made a commitment to turn their lives around and we’re helping them turn their brains back on.

Spending a day immersed in innovation can be a profound experience for at-risk children. It inspires them to dream big. It reminds them there’s a wide world of possibilities open to them.

We are grateful to all the companies and schools that provide Vocational Orientation tours for our students. In doing so, they are giving back to the community and investing in tomorrow’s workforce.

[Show picture list]

3D ThinkLink Initiative: More Than 200 Students Reached

News
3D ThinkLink graduates from Capital Guardian Youth ChalleNGe Academy, December 2014

What began with a few teens at one school has grown into a program that’s brought the magic of 3D printing to more than 200 young people coast to coast.

As soon as we launched our 3D ThinkLink pilot project at Maryland’s Freestate ChalleNGe Academy in early 2013, we started to see why it’s such a great teaching tool – especially for at-risk youth.

South Carolina Youth ChalleNGe Academy graduate Sherquana Adams holds one of her 3D-printed creations in YouthQuest's 3D ThinkLink immersion lab August 2014
SCYCA graduate Sherquana Adams holds one of her 3D-printed creations

In more than two years of providing 3D design and printing classes, we’ve seen how the experience helps develop critical thinking and problem solving skills, encourages creativity and builds confidence.

Most of the students we work with have made decisions that led them down the wrong path and they see themselves as failures. Our classes help them understand that failure is not final; it’s just a step toward improvement and, ultimately, success. The software and hardware we use make it easy for them to try a project, analyze mistakes, make corrections and print again until they reach their goal.

Twenty-five Cadets from the Maryland, District of Columbia and South Carolina ChalleNGe Academies completed 3D ThinkLink training last month (see below), bringing our total of ChalleNGe Program grads so far to 111.

In March, more than 70 students from across the United States and Canada took part in our 3D printing workshops at the 41st Annual National Society of Black Engineers Convention in Anaheim, California.

Learning Moment of Inspiration 3D modeling software at Boys & Girls Club summer camp at Culmore Character Club in Fairfax County, Virginia July 2015
Learning 3D design at Boys & Girls Club summer camp

This month, we’re reaching dozens of kids in Northern Virginia for the first time by working with the Boys & Girls Clubs of Greater Washington to provide summer camp classes at the Culmore Character Club.

Another way we’re bringing 3D ThinkLink to more people is by making our curriculum available for teachers and students to buy online. On July 1, we wrapped up a crowdfunding project on Kickstarter that will cover the cost of creating the curriculum packages, which include Moment of Inspiration 3D modeling software, lesson plans and instructional videos.

Our goal is to give at-risk kids the tools they need to become successful adults. That includes academic and vocational training, along with developing the life skills that will keep them on track no matter what career path they choose. We don’t expect most our 3D ThinkLink students to end up in jobs that directly involve 3D design and printing, but we do expect the thinking skills and positive attitudes they develop in class will help them get ahead in any kind of job.

YouthQuest Co-Founder and President Lynda Mann with Adonis Gonzales, 3D ThinkLInk graduate from Freestate ChalleNGe Academy in June 2013
YouthQuest Co-Founder and President Lynda Mann with Adonis Gonzales

For example, there’s Adonis Gonzales, who was in our first class at Freestate. He always wanted to be a master electrician and now he’s in the second year of an apprenticeship program. In a recent interview with the Connection Newspapers, he talked about how he uses the problem solving skills he learned in our class to work through obstacles on the job.

Adonis also took our “failure is not final” message to heart. He didn’t pass his GED exam the first time he took it – or the second time. But he didn’t give up and he learned from his mistakes until, on the third try, he earned his GED.

Adonis is a remarkable young man and he’s going to do well in life. Stories like his encourage us to keep expanding the 3D ThinkLInk Initiative so we can touch the lives of more at-risk youth.

___________________________________

Congratulations to Our Latest Graduates

South Carolina Youth ChalleNGe Academy: Dishon Bailey, Chris Foster, Tyler Garcia, Jaya Geter, Aaliyah Lilly, LaKristopher McCoy, Joshua Milligan, Shiann O’Shea, Jared Pearsall, Craig Shipman
Capital Guardian Youth ChalleNGe Academy: Angela Bernfeld, Tyeshia Blackmond, Dylan Cooper, Ronnell Dillard, Steve James, Kyla Joyner, Darian Moore, Andrey Ortiz-Castillo, Angel Patterson
Freestate ChalleNGe Academy: Maurice Allen, Philbert Fisher, Benjamin Illioff, Johnathan Lainez, TreVaughn McBride, Maxim Pine

Here are some photo highlights of their 3D ThinkLink experience.

[Show picture list]

Essay Is ‘Clear Winner’ in Scholarship Competition

News
YouthQuest 3D ThinkLink esssay contest winner Aaliyah Lilly of South Carolina Youth ChalleNGe Academy with quote: I am excited for the future"

Aaliyah Lilly, a South Carolina Youth ChalleNGe Academy graduate, has earned a $500 scholarship for writing an outstanding essay about what she experienced in the YouthQuest Foundation’s 3D ThinkLink class.

“I often had troubles in school understanding key points, but since being a part of 3D printing, my way of thinking has gradually changed,” she wrote.

Cadet Aaliyah Lilly receives her essay contest scholarship from YouthQuest Secretary Bill Hall at SCYCA graduation June 10.
Cadet Aaliyah Lilly receives her award from YouthQuest Secretary Bill Hall at SCYCA graduation June 10.

Aaliyah, 17, is one of 25 Cadets at National Guard Youth ChalleNGe Academies who completed the 3D ThinkLink course during the latest class cycle. In the process of learning the basics of 3D design and printing, the students developed better critical thinking and problem solving skills.

3D ThinkLink training also provided a creative outlet, Aaliyah said, and introduced her to “the next generation’s technology.”

Aaliyah will receive her scholarship money when she enrolls in a higher education or trade school program. She’s interested in studying Media Communications and Hospitality Management and aspires to become a Public Affairs Specialist in the military.

But first, she wants to share what she’s learned with others at SCYCA.

South Carolina Youth ChalleNGe Academy Cadets LaKrisopher McCoy, Aaliyah Lilly and Shiann O'Shea visit 3D Systems headquarters for Vocational Orientation in April.
SCYCA Cadets LaKrisopher McCoy, Aaliyah Lilly and Shiann O’Shea visit 3D Systems headquarters for Vocational Orientation.

“After graduating Youth ChalleNGe Academy I plan return as a peer mentor to encourage those who are in the position I was in,” she wrote.

The competition was judged by YouthQuest supporter John Gilstrap, the New York Times bestselling author whose new thriller Against All Enemies comes out in July. He declared Aaliyah’s essay to be the “clear winner.”

“While several were very well written, this one reached beyond the introspection of how the program changed their lives to embrace how the lessons learned can then be passed along to a new group of future students,” he said.

You can read Aaliyah’s essay at the bottom of this page. Here are excerpts from essays some of her fellow students entered in the contest.

“Back home, not too many people believed in me and I often heard what I could not or would not do, but this program has given me more power to prove them wrong. … Thanks to 3D it has made me a better artist and very creative, I would have never known I could be so passionate and it has been very empowering to develop such skills. I have put a lot of hard work into this program and I have really enjoyed being a part of 3D.” – Tyeshia Blackmond, 17, Capital Guardian Youth ChalleNGe Academy, Washington, DC

“Since I joined the 3D printing class I have learned that everything does not come out right the first time. I have learned that it takes patience, hard work and dedication to have a successful print. For example the first item we made in 3D was a key chain. I believed it would take no longer than 20 to 30 minutes but it took up to 3 to 4 classes to completely finish because of all the shapes and lines needed. I wanted my project to be perfect so after every print I looked closely at the key chain. When the outcome was not right or did not look presentable to me I would have to fix it. This class also gave me motivation to stay in Capital Guardian Youth ChalleNGe Academy as a Cadet. Learning 3D was hard but it is worth it.” – Ronnell Dillard, 17, CGYCA

“I knew that I was going to learn something new, but I was not sure what it would be about or how challenging it would be. Once I was in the program, my perception and outlook changed, dramatically. I recently saw a quote that said, “Don’t let your fear of breaking things keep you from trying new experiments. That’s how you learn about the real world.” Now that I’ve gotten an opportunity to practice using the program and learning from it, I see that it is a fun and addictive program that can and is being used in daily society… And if I break something, it’s OK. I’ll print it again.” – TreVaughn McBride, 17, Freestate ChalleNGe Academy, Maryland

___________________________________

How 3D Printing Has Changed My Life

by Aaliyah M. Lilly, age 17
South Carolina Youth ChalleNGe Academy

I believe that you must be willing to change your perspective to seek ultimate opportunities. Prior to coming into South Carolina Youth ChalleNGe Academy I had no intentions of participating in any extracurricular activities, but I found interest in 3D Printing and Systems. 3D printing has been an outlet I’ve used to be creative while also gaining knowledge of the next generation’s technology. Since the start of the course I have learned not only the concept of 3D printing, but how to come with up an idea, design it, and turn it into reality. I often had troubles in school understanding key points, but since being a part of 3D printing, my way of thinking has gradually changed. I am very grateful to be able to express myself now through my work.

After graduating Youth ChalleNGe Academy I plan return as a peer mentor to encourage those who are in the position I was in. After that, I plan to attend AmeriCorps. However, my overall goal is to enlist into the military as a Public Affairs Specialist while majoring in Media Communications and Hospitality Management. I plan to take the skills I learned from 3D printing and utilize them in my personal life. I hope to design personalized 3D print items that will provide another stream of income as an entrepreneur.

One of my ultimate life goals is to be able to help my father financially by becoming self-sufficient. Growing up in a single parent household, my father has been the most influential person in life. I watched him struggle to raise me as a young female. I believe that everything I do is in honor of my father.

He instilled in me knowledge and gave me the guidance that I will need to be independent. I am excited for the future and thankful for what 3D printing has given me.

1 2